Examkin

Question

Difficulty: MediumTechnical Specifications, Quantities, and Measurements

An industrial quality control supervisor provides the following recorded briefing to line operators regarding automated beverage packaging:

"For the 500-milliliter glass container batch, calibrate the high-speed filler nozzle to dispense liquid at a flow rate of 35 milliliters per second under an operating pressure of 2.4 bars. Maintain the liquid sterilization temperature at 88 degrees Celsius with an allowable deviation of no more than 1.5 degrees. If adjusting the conveyor belt speed for this container size, set the drive motor to 45 rotations per minute, whereas the larger 1-liter containers require 30 rotations per minute."

According to the supervisor's instructions, which technical specification must be maintained for the high-speed filler nozzle when processing the 500-milliliter glass containers?

  1. A
    A dispensing flow rate of 45 milliliters per second under a pressure of 2.4 bars
  2. B
    A dispensing flow rate of 30 milliliters per second under a pressure of 1.5 bars
  3. A dispensing flow rate of 35 milliliters per second under a pressure of 2.4 barsAnswer
  4. D
    A dispensing flow rate of 35 milliliters per second under a pressure of 1.5 bars

Answer

A dispensing flow rate of 35 milliliters per second under a pressure of 2.4 bars
The supervisor states that for the 500-milliliter glass container batch, operators must calibrate the high-speed filler nozzle to dispense liquid at a flow rate of 35 milliliters per second under an operating pressure of 2.4 bars. The option indicating 35 milliliters per second and 2.4 bars directly matches both required technical values.

Step-by-Step Solution

1
Identify the container type and component referenced in the prompt
The target unit is the high-speed filler nozzle for the 500-milliliter glass container batch.
The spoken excerpt includes separate parameters for different container sizes and mechanical subsystems.
2
Extract the specific numerical quantities and units assigned to the filling nozzle
The supervisor designates a dispensing flow rate of 35 milliliters per second and an operating pressure of 2.4 bars.
These measurements are directly linked to the calibration of the filling nozzle in the first operational sentence.
3
Distinguish target values from secondary equipment parameters and tolerance thresholds
The values 88 degrees Celsius and 1.5 degrees apply to sterilization, while 45 and 30 rotations per minute govern conveyor drive speeds.
Filtering out secondary metrics prevents misattributing related operational values to the primary nozzle setting.

Key Concept

Extracting multi-parameter technical specifications and units of measurement from spoken instructional transcripts
Estimated Time:1m 15s
Rate this question

Topics

Technical Specifications, Quantities, and Measurements

More questions from this topic