Examkin

Question

Difficulty: EasySoldering Equipment

When preparing to solder a wire splice, what is the proper procedure for applying heat and solder to ensure a sound electrical connection?

  1. A
    Melt the solder directly onto the soldering iron tip and allow it to drip onto the cold wire joint.
  2. B
    Wrap the bare wire joint in insulating vinyl tape before touching it with the heated iron tip.
  3. Heat the wire connection directly with the iron tip, then touch the solder to the heated metal joint.Answer
  4. D
    Apply corrosive acid-core paste across the wire strands before applying the soldering iron.

Answer

Heat the wire connection directly with the iron tip, then touch the solder to the heated metal joint.
Proper soldering technique requires heating the metal workpiece directly with the iron tip until it reaches the melting temperature of solder. When solder is applied to the heated joint, it melts cleanly and flows evenly across the conductors through capillary action, ensuring low resistance and high mechanical integrity.

Step-by-Step Solution

1
Clean and tin the soldering iron tip to ensure optimal thermal conductivity.
The soldering iron tip is prepared to transfer heat efficiently to the workpiece.
Oxidation on the tip acts as a thermal barrier, impeding heat transfer.
2
Hold the flat face of the hot iron tip firmly against the joined wire strands.
The metal joint quickly reaches the melting point temperature of the solder alloy.
Molten solder flows naturally toward the source of heat across preheated metal surfaces.
3
Apply rosin-core solder to the heated wire connection on the side opposite the iron tip.
The solder melts cleanly, wetting the conductors and forming a bright, smooth joint.
Allowing the heated workpiece to melt the solder prevents cold joints and premature flux burn-off.

Key Concept

Proper Soldering Technique and Heat Transfer
Estimated Time:45s
Rate this question

Topics

Soldering Equipment

More questions from this topic