Examkin

Question

Difficulty: MediumBacking Safety Rules

A driver needs to guide a vehicle into a narrow alley alcove with overhead pipes and tight side clearances. To maintain maximum control and safety throughout this maneuver, which operating procedure should the driver follow?

  1. A
    Rely exclusively on the driver-side flat mirror to maintain a continuous, uninterrupted reversing pace.
  2. Back as slowly as possible in the lowest reverse gear to allow immediate stopping and easier steering corrections.Answer
  3. C
    Coast backward in neutral while controlling speed solely with the service brakes to avoid engine stalling.
  4. D
    Apply moderate acceleration in a higher reverse gear to carry sufficient momentum over uneven ground.

Answer

Back as slowly as possible in the lowest reverse gear to allow immediate stopping and easier steering corrections.
Official commercial driving safety standards dictate that drivers should always back as slowly as possible using the lowest reverse gear. This provides the highest degree of vehicle control, allows steering adjustments to take effect smoothly, and ensures the vehicle can be halted instantly if an unseen obstacle appears.

Step-by-Step Solution

1
Select the lowest available reverse gear before initiating movement.
The vehicle's speed is mechanically governed and torque is smoothly delivered.
Using the lowest gear prevents unexpected lunges and keeps the vehicle at a manageable creep speed.
2
Maintain minimum speed while continuously scanning all mirrors and clearance points.
Any steering deviations can be corrected gradually without overshooting the intended path.
Slow speed allows immediate stopping distance and full situational awareness around tight obstacles.

Key Concept

Backing Speed and Gear Selection Safety Rules
Estimated Time:1m 0s
Rate this question

Topics

Backing Safety Rules

More questions from this topic