Question

Difficulty: MediumCab Inspection and Engine Start

Prior to departing on a trip, a driver starts the diesel engine and completes the necessary in-cab safety verification. Which condition meets all regulatory operating standards?

  1. A
    Power steering free play measures 15 degrees of rotation before the front wheels respond.
  2. B
    The cab safety kit contains two reflective triangles and a properly rated fire extinguisher, with spare fuses omitted.
  3. Oil pressure rises into the manufacturer's specified operating range within a few seconds of startup.Answer
  4. D
    Steering free movement reaches approximately 3 inches before turning the tires on a standard 20-inch wheel.

Answer

Oil pressure rises into the manufacturer's specified operating range within a few seconds of startup.
During engine startup, oil pressure must rise to its normal operational level within seconds; if it fails to do so, the engine must be turned off immediately to prevent damage.

Step-by-Step Solution

1
Evaluate engine startup instrument response thresholds.
Oil pressure must stabilize in the normal operating range within a few seconds after the engine begins running.
Immediate oil circulation is essential to protect engine components from catastrophic failure.
2
Evaluate steering play tolerance against safety standards.
Maximum acceptable free play is roughly 10 degrees or about 2 inches on a 20-inch steering wheel.
Measurements of 15 degrees or 3 inches exceed allowable limits and indicate worn or loose steering components.
3
Verify required commercial motor vehicle emergency equipment.
The cab must carry three reflective triangles, a fully charged and properly rated fire extinguisher, and spare fuses.
Carrying only two triangles and omitting spare fuses fails commercial motor vehicle safety requirements.

Key Concept

In-cab instrument verification and safety equipment compliance standards
Estimated Time:1m 0s
Rate this question