Examkin

Question

Difficulty: EasyHot Weather Driving

High ambient temperatures significantly accelerate heat accumulation in commercial vehicle tires, increasing the risk of tire failure and blowouts. According to commercial driving safety standards, how often must a driver stop to inspect tires for excessive heat and air pressure during hot weather operations?

  1. A
    Every 4 hours or every 240 miles during scheduled driving shifts
  2. Every 2 hours or every 100 milesAnswer
  3. C
    Only when steer tire tread depth is visually suspected to be under 4/32 inch
  4. D
    Only after performing hard emergency braking on softened asphalt

Answer

Every 2 hours or every 100 miles
In hot weather, continuous driving generates rapid internal heat and pressure within tires. The official CDL safety rule requires drivers to stop and inspect their tires every 2 hours or every 100 miles to detect overheating and prevent blowouts.

Step-by-Step Solution

1
Identify the primary hazard hot weather poses to commercial vehicle tires.
Recognized that high ambient heat combined with continuous rolling friction causes rapid tire heat and pressure escalation.
Excessive internal tire heat weakens the tire body and significantly increases blowout risk.
2
Apply the standard commercial driver safety inspection rule for hot weather operations.
Identified the required inspection frequency of stopping every 2 hours or every 100 miles.
Frequent checks allow drivers to feel tire hubs and treads to catch dangerous heat buildup before a tire blows out.

Key Concept

En-route tire inspection frequency in hot weather
Estimated Time:45s
Rate this question

Topics

Hot Weather Driving

More questions from this topic