Examkin

Question

Difficulty: EasyInspecting Cargo (Responsibilities and Schedule)

A commercial driver is hauling general freight on an open flatbed trailer. Following the initial pre-trip inspection, when is the driver required to conduct the first en-route inspection of the cargo and its securement devices?

  1. A
    Within the first 25 miles of beginning the trip
  2. Within the first 50 miles of beginning the tripAnswer
  3. C
    After driving continuously for 2 hours or 100 miles
  4. D
    Only during scheduled fuel stops or mandatory rest breaks

Answer

Within the first 50 miles of beginning the trip
According to commercial driving safety regulations, drivers must inspect cargo and securement devices prior to driving, within the first 50 miles after beginning a trip, and every 3 hours or 150 miles thereafter (as well as after every break). The first 50 miles allow the driver to verify that cargo has not settled or loosened initial tie-downs.

Step-by-Step Solution

1
Identify the standard CDL cargo inspection timeline requirements.
Regulations specify pre-trip inspection, a first en-route check within 50 miles, and subsequent checks every 3 hours or 150 miles.
Cargo often settles and shifts during initial transit, requiring an early check to adjust securement devices.
2
Select the required milestone for the first en-route check.
The milestone is within the first 50 miles.
This matches standard commercial motor vehicle safety regulations.

Key Concept

CDL Cargo Inspection Schedule and Intervals
Estimated Time:45s
Rate this question

Topics

Inspecting Cargo (Responsibilities and Schedule)

More questions from this topic