Match each network or peripheral cable and connector type on the left with its corresponding technical specification or capability on the right.
- Cat 6 UTP CableSupports 10GBASE-T Ethernet up to 55 meters with a maximum rated operating frequency of 250 MHz.
- Molex ConnectorLegacy 4-pin peripheral power connector providing +5 VDC (red) and +12 VDC (yellow) power rails.
- SC Fiber Optic ConnectorSquare snap-in (push-pull) fiber connector commonly used in enterprise gigabit network infrastructure.
- USB 3.2 Gen 2x2 CableDelivers up to 20 Gbps throughput by running dual 10 Gbps lanes exclusively over USB Type-C connections.
Answer
Cat 6 UTP Cable matches 10GBASE-T up to 55 meters at 250 MHz; Molex Connector matches 4-pin legacy power (+5V/+12V); SC Fiber Optic Connector matches square push-pull fiber connector; USB 3.2 Gen 2x2 Cable matches 20 Gbps dual-lane throughput over USB Type-C.
The correct matches align each physical cable or connector with its exact electrical, optical, or protocol specifications: Cat 6 UTP supports 10 Gbps up to 55 meters at 250 MHz; Molex provides +5V and +12V power over 4 pins; SC is a square push-pull fiber optic connector; and USB 3.2 Gen 2x2 delivers 20 Gbps dual-lane throughput exclusively over USB Type-C.
Step-by-Step Solution
Key Concept
Identifying network and peripheral cable specifications, physical connector form factors, and signaling capabilities.