Examkin

Question

Difficulty: MediumLaptop Display Components and Features

A technician is disassembling the upper clamshell display assembly of a modern touchscreen laptop equipped with an LED-backlit screen. Which TWO of the following components are physically housed inside or routed through this display enclosure?

  1. Touchscreen digitizer layerAnswer
  2. Wi-Fi antenna wire harnessAnswer
  3. C
    High-voltage CCFL backlight inverter board
  4. D
    SO-DIMM system memory expansion slots
  5. E
    Dedicated audio CODEC sound controller chip

Answer

The touchscreen digitizer layer and the Wi-Fi antenna wire harness are both located inside the laptop display enclosure assembly.
The touchscreen digitizer layer (which converts touch contacts into digitised data) and the Wi-Fi antenna wire harness (routed into the top of the display bezel for maximum radio coverage) are standard internal components of the upper display assembly frame.

Step-by-Step Solution

1
Identify components integrated within a modern touchscreen laptop's top enclosure.
Recognize that the glass digitizer grid overlays the LCD panel and the Wi-Fi antenna leads extend into the top bezel frame.
Positioning the Wi-Fi antenna in the top lid provides optimal signal reception clear of lower chassis interference, while the digitizer captures touch input on the screen.
2
Evaluate and rule out base chassis components and legacy display parts.
Eliminate the CCFL inverter board (LED backlights do not use inverters), SO-DIMM RAM slots (located on the system motherboard), and audio CODEC chips (integrated into the motherboard in the base).
Modern LED displays use direct DC power from the motherboard/display cable, while memory modules and audio controllers belong in the main base unit.

Key Concept

Laptop Display Enclosure Assembly Components
Rate this question

Topics

Laptop Display Components and Features

More questions from this topic