A network administrator is establishing operational documentation for a newly deployed branch office. To ensure efficient remote troubleshooting, the administrator needs to define which details belong specifically on the logical network diagram rather than the physical topology diagram.
Which of the following components should be documented on the logical network diagram? (Select TWO.)
- IP address subnets, CIDR notations, and VLAN identifiers associated with network segment boundariesAnswer
- Dynamic routing protocol boundaries, autonomous system numbers (ASNs), and network gatewaysAnswer
- CRack unit height elevations, chassis slot placement, and physical patch panel port assignments
- DIndividual host adapter IP configurations set to physical interface addresses instead of the First Hop Redundancy Protocol (FHRP) virtual gateway IP
- ESNMPv1 cleartext community strings configured for remote telemetry gathering
Answer
The correct components to include on a logical network diagram are the IP address subnets with VLAN identifiers and the dynamic routing protocol boundaries with ASNs and network gateways.
Logical network diagrams focus on how data moves logically through a network. They display IP address subnets, VLAN IDs, CIDR notation, routing protocol domains, autonomous system numbers (ASNs), and default gateways. In contrast, physical rack dimensions, slot locations, and specific host configuration errors do not belong on a logical topology map.
Step-by-Step Solution
Key Concept
Logical vs. Physical Network Diagrams
Estimated Time:1m 30s