Examkin

Question

Difficulty: EasyTurning Procedures and Signaling

When preparing to make a left turn at an upcoming intersection from a two-way street, what is the correct procedural sequence of actions a driver must follow? Arrange the steps in the correct order from first to last.

  1. 1Check rear-view and side mirrors and conduct a shoulder check for surrounding traffic and blind spots.
  2. 2Activate the left turn signal continuously at least 100 feet before reaching the intersection.
  3. 3Position the vehicle into the lane closest to the center line while slowing down smoothly.
  4. 4Yield the right-of-way to oncoming vehicles and pedestrians before completing the turn into the proper lane.

Answer

The correct sequence for making a left turn is: Check mirrors and blind spots -> Activate left turn signal -> Position vehicle near center line while slowing -> Yield to oncoming traffic/pedestrians and complete the turn.
Executing a safe left turn requires establishing situational awareness first via mirror and blind spot checks, giving continuous turn indication at least 100 feet prior to the turn, positioning the vehicle near the center line, and yielding to oncoming traffic and pedestrians before completing the maneuver.

Step-by-Step Solution

1
Check mirrors and perform a shoulder blind-spot check.
Identifies surrounding vehicles, cyclists, and pedestrians.
Initial visual checks ensure the roadway is safe before initiating any turn sequence.
2
Turn on the left directional signal at least 100 feet in advance.
Gives adequate advance notice of intent to surrounding drivers.
Traffic laws mandate continuous signaling prior to turning to prevent rear-end and side collisions.
3
Move smoothly into the lane closest to the center line while decelerating.
Sets up proper vehicle trajectory for entering the cross street.
Proper lane positioning keeps traffic moving efficiently and prevents wide, unsafe turns.
4
Yield to oncoming straight-through vehicles and pedestrians, then steer into the left-most receiving lane.
Completes the left turn safely without disrupting right-of-way traffic.
Left-turning vehicles must yield to oncoming traffic unless a protected green arrow is displayed.

Key Concept

Standard Left-Turn Execution Sequence
Rate this question

Topics

Turning Procedures and Signaling

More questions from this topic