Question

Difficulty: MediumTurning Procedures and Signaling

A motorist approaches an uncontrolled intersection on a two-lane roadway intending to make a left turn onto a cross street. An oncoming vehicle is approaching straight through the intersection from the opposite direction. Which procedure must the driver follow to execute this turn legally and safely?

  1. Signal continuously for at least 100 feet prior to turning and yield right-of-way to oncoming traffic until it is safe to cross.Answer
  2. B
    Signal continuously for at least 100 feet prior to turning and proceed immediately, because left-turning vehicles have right-of-way over straight-through traffic at uncontrolled intersections.
  3. C
    Activate the turn signal at the moment the vehicle begins turning into the intersection while yielding to oncoming traffic.
  4. D
    Signal continuously for at least 100 feet prior to turning and proceed without yielding if an overhead solid circular green signal light is active.

Answer

Signal continuously for at least 100 feet prior to turning and yield right-of-way to oncoming traffic until it is safe to cross.
When turning left across opposing lanes of traffic, legal standards require drivers to signal their intention continuously for a minimum distance of 100 feet before reaching the turn point, and to yield the right-of-way to oncoming traffic traveling straight.

Step-by-Step Solution

1
Determine legal turn signal notification distance
Driver must activate the turn signal at least 100 feet before reaching the intersection
Provides sufficient warning to following vehicles and oncoming traffic of the intended maneuver
2
Establish right-of-way obligations for turning left across traffic
Yield to oncoming vehicles proceeding straight
Left turns cross opposing traffic lanes, requiring the turning driver to yield until the intersection is clear

Key Concept

Left-turn signaling distance and right-of-way requirements
Estimated Time:1m 0s
Rate this question