Examkin

Question

Difficulty: HardTurning Procedures and Signaling

A motorist traveling on a multi-lane boulevard approaches an intersection with a dedicated right-turn lane (turn pocket). The motorist intends to make a right turn at the intersection. Which of the following procedures legally complies with turn signaling and lane positioning requirements?

  1. Signal continuously for at least 100 feet prior to crossing into the turn lane, complete the lane transition into the pocket, and maintain the signal until the turn is fully executed.Answer
  2. B
    Move into the right-turn lane first, and then activate the right turn signal continuously for 100 feet immediately before reaching the intersection.
  3. C
    Signal for 50 feet before entering the turn lane, then turn off the turn signal while inside the turn pocket since the dedicated lane already indicates turning intent.
  4. D
    Activate the right turn signal 100 feet before the intersection, but temporarily deactivate the signal while crossing into the turn pocket to prevent confusing drivers behind.

Answer

Signal continuously for at least 100 feet prior to crossing into the turn lane, complete the lane transition into the pocket, and maintain the signal until the turn is fully executed.
The correct option outlines proper driver knowledge: drivers must signal continuously for at least 100 feet prior to entering a dedicated turn lane (turn pocket) and keep the signal activated until the turn is completely executed at the intersection.

Step-by-Step Solution

1
Identify the initial maneuver requiring a signal
Transitioning from the main traffic lane into a dedicated turn lane constitutes a lane change.
Traffic laws dictate that any intent to change lateral positioning across lane markings requires advance signaling.
2
Determine the required signaling distance
The turn signal must be activated continuously for a minimum of 100 feet prior to entering the turn pocket.
Standard DMV regulations require 100 feet of continuous notification before executing lane changes or turns.
3
Determine signal duration through turn completion
The signal must remain active while decelerating in the turn pocket and completing the right turn at the intersection.
Continuous signaling provides clear notice to surrounding vehicular traffic and pedestrians throughout the entire turning sequence.

Key Concept

Turning Procedures and Signaling Distance for Dedicated Turn Lanes
Rate this question

Topics

Turning Procedures and Signaling

More questions from this topic