Question

Difficulty: MediumPavement Markings and Lane Lines

You are driving on a two-lane highway behind a slow-moving agricultural vehicle. As you approach an upcoming roadway intersection, the centerline on your side transitions from a broken yellow line to a solid yellow line. Which of the following statements accurately describes your legal obligation regarding passing in this situation?

  1. You are prohibited from initiating or completing a pass across the solid yellow line and within 100 feet of the intersection.Answer
  2. B
    You may cross the solid yellow line to pass if the vehicle ahead is traveling at less than half the posted speed limit.
  3. C
    You may cross the solid yellow line to pass as long as the passing maneuver is fully completed prior to entering the intersection crosswalk.
  4. D
    You may cross the solid yellow line if your visibility of oncoming traffic is unobstructed for at least 500 feet.

Answer

You are prohibited from initiating or completing a pass across the solid yellow line and within 100 feet of the intersection.
A solid yellow line on your side of the roadway indicates a no-passing zone, meaning drivers must not cross into opposing traffic lanes to overtake. In addition, traffic laws prohibit passing another vehicle within 100 feet of an intersection due to the increased hazard of turning traffic and crossing vehicles.

Step-by-Step Solution

1
Evaluate the pavement marking regulation on the roadway
A solid yellow line painted on the driver's side of the centerline indicates a strict no-passing zone.
Traffic laws establish that drivers must not cross a solid yellow line on their side of the road to overtake other vehicles.
2
Evaluate statutory passing limitations near intersections
Passing or driving on the left side of the roadway within 100 feet of an intersection is unlawful.
Intersections create high collision risks due to cross-traffic, turning vehicles, and pedestrian crossings.

Key Concept

Solid Centerline Markings and Intersection Passing Restrictions
Estimated Time:1m 0s
Rate this question