Examkin

Traffic Signs, Signals, and Road Markings

482 questions

All types482Multiple choice234True / False211Matching37
Question 81Question →

A driver approaches an intersection where the lane is posted with a white rectangular regulatory sign stating 'RIGHT LANE MUST TURN RIGHT'. However, a uniformed law enforcement officer stationed at the intersection explicitly signals the driver to proceed straight through from that lane. What is the driver legally required to do in this situation?

Show answer & explanation

Answer: Follow the directions given by the law enforcement officer and proceed straight through the intersection.

Answer

Follow the directions given by the law enforcement officer and proceed straight through the intersection.
Directions given by a law enforcement officer or traffic control personnel always take precedence over posted regulatory traffic signs, signals, and pavement markings. When an officer instructs a driver to proceed straight from a lane designated for right turns only, the driver must obey the officer.

Step-by-Step Solution

1
Identify the conflict between the posted regulatory sign ('RIGHT LANE MUST TURN RIGHT') and the direct manual signal of the traffic officer.
Recognize that two conflicting commands exist at the intersection.
The driver must establish which traffic control instruction takes priority under traffic law.
2
Apply the statutory order of priority for traffic control commands.
Law enforcement officer directions supersede all signs, signals, and pavement markings.
Traffic officers manage dynamic road conditions and emergency scenarios that static signs cannot account for.
3
Select the action corresponding to the officer's explicit hand signal.
Proceed safely straight through the intersection from the right lane as directed.
Complying with the officer maintains intersection safety and legal compliance.

Key Concept

Traffic Officer Priority Over Regulatory Traffic Control Devices
Question 82Question →

You are driving on a multi-lane street and approach an intersection intending to turn left. The left-turn lane has a dedicated signal head displaying a flashing yellow arrow, while oncoming traffic has a solid green signal. As you enter the intersection buffer zone, a pedestrian enters the marked crosswalk across the street you intend to turn onto, and a police officer stationed in the intersection gestures for oncoming traffic to stop while signaling for you to hold your position. What is the legally required action for your vehicle under these conditions?

Show answer & explanation

Answer: Remain stopped as directed by the police officer, regardless of what the flashing yellow arrow signal indicates.

Answer

Remain stopped as directed by the police officer, regardless of what the flashing yellow arrow signal indicates.
Manual directions given by a police officer or authorized traffic controller always take precedence over electronic traffic signals, pavement markings, and signs. Although a flashing yellow arrow normally permits drivers to turn left after yielding to oncoming vehicles and pedestrians, the officer's explicit instruction to hold position overrides the signal indicator.

Step-by-Step Solution

1
Identify the hierarchy of traffic control authority at the intersection.
Recognize that active manual directions from an authorized traffic or police officer supersede electronic traffic light signals.
Traffic laws explicitly mandate compliance with an officer's hand signals over automated traffic devices.
2
Evaluate the officer's specific instruction.
The officer gestured for your vehicle to hold its position.
Even though a flashing yellow arrow allows yielding drivers to proceed when clear, the officer's order to hold position takes precedence.
3
Determine the required driver behavior.
Stop and remain stationary until the officer directs you to proceed.
Disregarding officer hand directions constitutes a traffic violation regardless of signal status.

Key Concept

Traffic Officer Signal Priority and Flashing Light Rules
Estimated Time:1m 30s
Question 83Question →

When facing an overhead traffic signal displaying a solid circular red light alongside a illuminated steady green right-turn arrow, a driver intending to turn right is legally required to bring their vehicle to a complete stop at the stop line before executing the turn.

Show answer & explanation

Answer: False

Answer

The statement is False. A steady green arrow grants a protected movement, allowing drivers turning in the indicated direction to proceed without making a full stop.
The correct response is False because a steady green arrow grants a protected right-of-way turn movement. Drivers turning in the direction shown by the arrow are not required to stop before entering the intersection, provided the pathway is clear of pedestrians and existing traffic.

Step-by-Step Solution

1
Identify the active signal indication controlling the right-turn movement.
The traffic control signal displays a steady green right-turn arrow concurrent with a solid red circular light for straight-through movements.
Traffic signal heads frequently utilize arrow lenses to regulate directional lane movements independently from straight-through traffic flow.
2
Apply standard legal rules governing steady green arrow traffic signals.
A steady green arrow indicates a protected movement phase where conflicting traffic flows face red signals.
Unlike a standard right turn on a circular red light, a green arrow indication does not require a preliminary complete stop before crossing the limit line.
3
Determine required driver actions and right-of-way obligations.
The driver may proceed continuously into the turn, yielding only to pedestrians or vehicles already legally within the intersection area.
Stopping unnecessarily when presented with a green protected arrow disrupts traffic flow and increases the risk of rear-end collisions.

Key Concept

Protected Directional Signal Indications and Right-of-Way Rules
Question 84Question →

A yellow, diamond-shaped traffic sign featuring a black symbol of a walking person indicates that drivers are approaching a pedestrian crossing and should prepare to slow down and yield.

Show answer & explanation

Answer: True

Answer

The statement is true. A yellow diamond-shaped sign depicting a pedestrian is a standard warning sign advising drivers of an upcoming pedestrian crossing zone.
The statement is correct because yellow diamond-shaped signs with a black pedestrian graphic function as warning signs. Their legal purpose is to alert motorists to watch for pedestrians entering the roadway so that speed can be reduced in time.

Step-by-Step Solution

1
Identify the shape, color, and symbol of the sign.
The sign is a yellow diamond with a black pedestrian symbol.
Yellow diamond signs are universally used to warn drivers of upcoming roadway conditions or hazards.
2
Determine the required driver behavior upon seeing this sign.
Drivers must slow down, scan the road ahead for pedestrians, and prepare to yield if necessary.
Warning signs provide advance notice so drivers can adjust their speed and actions before reaching the hazard.

Key Concept

Pedestrian Warning Sign Recognition and Driver Action
Question 85Question →

A driver is traveling on a two-lane road marked with a single broken yellow centerline and wishes to overtake a slow-moving vehicle 75 feet before an upcoming highway intersection. Which statement correctly describes the legality of this passing maneuver?

Show answer & explanation

Answer: The passing maneuver is illegal because passing is prohibited within 100 feet of an intersection regardless of pavement markings.

Answer

The passing maneuver is illegal because passing is prohibited within 100 feet of an intersection regardless of pavement markings.
While a single broken yellow centerline normally permits passing when safe, traffic law explicitly forbids driving on the left side of the roadway to pass within 100 feet of an intersection. Because the vehicle is 75 feet away, the pass is illegal regardless of line markings.

Step-by-Step Solution

1
Identify the pavement marking rules
A broken yellow centerline indicates that passing is generally permitted when safe.
Yellow lines separate traffic moving in opposite directions.
2
Evaluate location-based statutory passing restrictions
Traffic regulations prohibit passing on the left side of the road within 100 feet of an intersection, railroad crossing, bridge, or tunnel.
Specific statutory prohibitions supersede general lane line indications.
3
Determine legal status for the given scenario
Since the driver is 75 feet from the intersection (within the 100-foot zone), passing is illegal.
The driver must wait until passing the intersection.

Key Concept

Intersection Passing Restrictions and Lane Markings
Estimated Time:1m 0s
Question 86Question →

A posted white rectangular regulatory sign depicting a black curved arrow pointing to the left covered by a red circle with a diagonal red slash legally prohibits drivers from performing both a left turn and a U-turn at the intersection.

Show answer & explanation

Answer: True

Answer

The statement is TRUE. A 'No Left Turn' regulatory sign legally prohibits both left turns and U-turns at the designated location.
The statement is true because regulatory traffic standards dictate that a 'No Left Turn' sign forbids both left turns and U-turns at the intersection, as a U-turn requires making an initial leftward turn.

Step-by-Step Solution

1
Identify the symbol and function of the described regulatory sign.
The white rectangular sign featuring a curved left arrow inside a red circle with a diagonal slash represents the standard 'No Left Turn' regulatory sign.
Red circles with diagonal slashes are standardized regulatory symbols indicating prohibited driver actions.
2
Apply standard traffic law rules regarding left-turn prohibition signage.
Under the Manual on Uniform Traffic Control Devices (MUTCD) and state motor vehicle codes, a 'No Left Turn' sign restricts both left turns and U-turns unless a separate sign explicitly allows U-turns.
A U-turn inherently begins with a left turn maneuver; thus, prohibiting left turns legally prevents drivers from initiating U-turns to avoid hazardous traffic conflicts.

Key Concept

A 'No Left Turn' regulatory sign prohibits both left turns and U-turns at an intersection.
Question 87Question →

When preparing to make a right turn at an intersection on a street with a designated bicycle lane separated by a solid white line, a driver is legally permitted to enter the bicycle lane within 200 feet of the turn after yielding to any bicyclists.

Show answer & explanation

Answer: True

Answer

The statement is TRUE. Drivers preparing to turn right must safely merge into the bicycle lane within 200 feet of the intersection after yielding to cyclists.
The statement is correct because state traffic laws require motorists turning right to signal, check for bicycle traffic, yield if necessary, and merge into the bicycle lane within 100 to 200 feet of the intersection before making the turn.

Step-by-Step Solution

1
Identify the pavement marking and scenario
The roadway features a bicycle lane designated by a solid white lane line near an intersection where the driver intends to make a right turn.
Understanding pavement line rules regarding bicycle lanes is essential for executing safe right turns.
2
Apply statutory rules for right turns across bicycle lanes
Traffic safety regulations require drivers to enter the bicycle lane 100 to 200 feet before the intersection before completing a right turn, rather than turning directly across the lane from an adjacent travel lane.
Merging into the bicycle lane first ensures that the driver does not turn directly into the path of an approaching bicyclist (a 'right-hook' collision).
3
Verify safety requirements prior to crossing the solid white line
The driver must signal, check mirrors and blind spots, and yield the right-of-way to any bicyclists already in the lane before entering.
Bicyclists in the bike lane have the right-of-way.

Key Concept

Bicycle Lane Pavement Markings and Turn Rules
Estimated Time:45s
Question 88Question →

Match each traffic guide sign background color on the left to its correct informational purpose on the right.

Click a left item, then click its matching right item

Items

Green background
Blue background
Brown background
White background with black legend

Matches

Show answer & explanation

Answer

Green signs match directional guidance and distances; Blue signs match motorist services; Brown signs match public recreation and cultural sites; White signs with black legends match route markers and highway numbering.
Guide sign background colors follow strict national standards: Green is used for directional information and exit numbers; Blue indicates traveler services; Brown points to recreational and historical points of interest; White with black legend identifies route markers and official highway designations.

Step-by-Step Solution

1
Identify standard background color coding conventions for traffic guide and informational signs.
Green represents directional guidance, blue represents traveler services, brown represents public recreation, and white/black represents route markers.
Standardized sign colors allow drivers to recognize the type of information presented instantly without reading every word.
2
Connect each color category to its specific real-world usage.
Green pairs with highway directions/distances; Blue pairs with driver services; Brown pairs with parks/cultural sites; White/Black pairs with route designations.
Accurately matching sign colors to their definitions verifies understanding of federal and state road sign standards.

Key Concept

Color coding standards for guide and informational signs
Question 89Question →

You are approaching an intersection controlled by a triangular red-and-white Yield sign. As you slow down and assess the road ahead, you observe that there are no oncoming vehicles, cyclists, or pedestrians from any direction. Under traffic safety laws governing regulatory signs, what is the required driving procedure?

Show answer & explanation

Answer: Slow down and yield right-of-way, but proceed through without stopping if the roadway is entirely clear.

Answer

Slow down and yield right-of-way, but proceed through without stopping if the roadway is entirely clear.
The correct answer accurately describes legal compliance for a regulatory Yield sign. Drivers must reduce speed and prepare to stop if needed, but if no cross traffic, bicyclists, or pedestrians are present, coming to a complete stop is not required.

Step-by-Step Solution

1
Identify the regulatory sign type and legal obligation.
A red-and-white inverted triangle sign is a regulatory Yield sign, which mandates slowing down and yielding the right-of-way to cross traffic and pedestrians.
Regulatory signs inform drivers of specific traffic laws and legal requirements.
2
Evaluate intersection traffic conditions.
Observation confirms there are no oncoming vehicles, cyclists, or pedestrians.
Determining whether stopping is necessary depends on whether there is traffic to yield to.
3
Determine the required driving procedure.
Because the road is completely clear, the driver is permitted to proceed without coming to a full stop.
Unlike a Stop sign, a Yield sign requires a complete stop only when necessary to avoid interfering with traffic that has the right-of-way.

Key Concept

Regulatory Yield Sign Rules and Right-of-Way Compliance
Question 90Question →

A driver traveling on a two-lane road approaches a private driveway on the left. The centerline marking consists of a solid yellow line on the driver's side and a broken yellow line on the oncoming traffic's side. Which of the following actions is legally permitted for this driver?

Show answer & explanation

Answer: Crossing the solid yellow line to complete a left turn into the driveway after yielding to oncoming traffic.

Answer

Crossing a solid yellow line on your side of the road is legally permitted when executing a left turn into or out of a driveway, private road, or alley, provided the maneuver can be completed safely without interfering with oncoming traffic.
While a solid yellow line on the driver's side prohibits passing or overtaking other vehicles, state motor vehicle codes explicitly permit drivers to cross a solid yellow line to make a left turn into or out of an alley, private road, or private driveway when traffic is clear.

Step-by-Step Solution

1
Identify the pavement marking rules for yellow centerlines
A solid yellow line on your side prohibits passing or driving to the left of the center.
Yellow lines separate traffic moving in opposite directions.
2
Recognize statutory exceptions to solid yellow line restrictions
Drivers are permitted to cross a solid yellow line when executing a left-hand turn into a driveway or private road.
Prohibitions against crossing solid lines primarily govern overtaking/passing maneuvers, whereas access turns are legally exempt when clear.

Key Concept

Permitted Exceptions for Crossing Solid Yellow Centerlines
Estimated Time:1m 0s
Question 91Question →

A motorist is driving along a roadway and approaches a mid-block Pedestrian Hybrid Beacon (HAWK signal). The overhead signal, which was previously displaying dual solid red lights, shifts into a phase where the two red lights flash in an alternating pattern. The pedestrian who activated the beacon has completely crossed the roadway and reached the far sidewalk, leaving the crosswalk entirely clear. What is the legally required action for the driver in this situation?

Show answer & explanation

Answer: Come to a complete stop at the stop line, confirm the crosswalk remains clear of pedestrians, and then proceed with caution.

Answer

The driver must bring the vehicle to a full stop at the stop line, yield to any pedestrians if present, and then proceed through the crosswalk once it is verified clear, even while the lights continue alternating in flashing red.
At a Pedestrian Hybrid Beacon, alternating flashing red lights function identical to a stop sign: drivers must come to a complete stop, check for pedestrians, and proceed when the crosswalk is clear.

Step-by-Step Solution

1
Identify the signal type and state.
The signal is a Pedestrian Hybrid Beacon displaying alternating flashing red lights.
Alternating red flashing lights indicate a transition phase following the steady solid red stop indication.
2
Determine legal stopping requirements.
Driver must bring the vehicle to a complete stop.
Any flashing red indication requires a mandatory full stop prior to entering the crosswalk or intersection.
3
Assess pedestrian right-of-way and roadway conditions.
Verify that all pedestrians have completely cleared the crosswalk.
Drivers must yield right-of-way to pedestrians within the crosswalk zone.
4
Execute the proceeding action.
Proceed safely through the crosswalk.
Once stopped and cleared of pedestrians, drivers are permitted to proceed during the alternating flashing red phase without waiting for the signal to go dark.

Key Concept

Pedestrian Hybrid Beacon (HAWK Signal) Alternating Flashing Red Operation
Question 92Question →

When driving on a roadway posted with a rectangular white regulatory sign stating 'DO NOT PASS', a driver is permitted to cross a broken yellow centerline to overtake a slow-moving agricultural vehicle.

Show answer & explanation

Answer: False

Answer

False. Posted regulatory signs establish mandatory traffic rules, and a 'DO NOT PASS' sign strictly prohibits crossing the centerline to overtake any vehicle, regardless of its speed or the presence of broken yellow lines.
The statement is false because rectangular white regulatory signs carry the full force of law. A posted 'DO NOT PASS' sign strictly forbids passing maneuvers under all circumstances, overriding broken yellow centerline markings and offering no exemption for slow-moving equipment.

Step-by-Step Solution

1
Identify the legal authority and function of the posted sign.
The white rectangular 'DO NOT PASS' sign is a regulatory sign that conveys mandatory traffic laws.
Regulatory signs inform drivers of enforceable rules and statutory prohibitions on a given roadway segment.
2
Evaluate whether slow vehicle speed or broken pavement lines permit an exception.
Regulatory prohibition signs supersede general pavement markings and apply universally to all traffic.
Special hazards or limited sight distances that prompted the sign posting remain dangerous regardless of the vehicle being passed.

Key Concept

Regulatory signs mandate strict legal compliance and supersede general road markings without exception.
Question 93Question →

On a divided highway or one-way street, the pavement edge line located on the driver's far left side next to a median barrier is painted solid white.

Show answer & explanation

Answer: False

Answer

False. On divided highways and one-way roadways, the pavement edge line on the driver's far left side is painted solid yellow, while the right pavement edge line is painted solid white.
The statement is false because traffic standards require a solid yellow line to designate the left edge of a divided highway or one-way street, whereas solid white lines are used to mark the right shoulder boundary.

Step-by-Step Solution

1
Identify the standard color rules for longitudinal pavement edge lines on one-way or divided roads.
Yellow lines are assigned to the left edge of one-direction roadways, and white lines are assigned to the right edge.
Color uniformity helps drivers quickly recognize roadway orientation and boundaries, especially at night or in low visibility.
2
Evaluate the statement's assertion against official pavement marking standards.
The statement claims the left edge line next to the median is white, which contradicts the standard yellow marking rule.
Solid white lines on the right and solid yellow lines on the left delineate the boundary of travel lanes on divided highways.

Key Concept

Pavement Edge Line Color Standards on Divided Highways
Estimated Time:45s
Question 94Question →

On public highways, traffic signs with a blue background are used to provide drivers with what type of information?

Show answer & explanation

Answer: Motorist services such as gas stations, food, lodging, and hospitals

Answer

Motorist services such as gas stations, food, lodging, and hospitals
Traffic guide signs with a blue background indicate motorist services, such as gas stations, restaurants, hotels, rest areas, and hospital facilities.

Step-by-Step Solution

1
Identify the background color specified in the question stem.
The sign background color is blue.
Traffic signs use standardized background colors to communicate distinct categories of information quickly to drivers.
2
Recall standardized guide sign color conventions.
Blue signs indicate driver services, green signs give directional and destination information, brown signs point to cultural or recreational areas, and yellow signs warn of hazards.
Standardized color codes enable drivers to interpret sign intent from a distance.

Key Concept

Standardized background colors for traffic guide signs, specifically blue for motorist services.
Estimated Time:45s
Question 95Question →

A driver approaching an intersection on a one-way street intending to turn left onto another one-way street may legally execute the left turn after coming to a complete stop at a solid red arrow signal, provided the intersection is clear of pedestrians and cross traffic.

Show answer & explanation

Answer: False

Answer

The statement is False. A solid red arrow signal strictly prohibits turning in the direction of the arrow until a permissive signal is shown, regardless of whether the driver is on a one-way street.
A solid red arrow signal explicitly forbids any turning movement in the direction of the arrow while it remains illuminated. Unlike circular red lights, which allow turns after a complete stop under specific circumstances (such as right turns on red or left turns from a one-way street onto a one-way street), a red arrow signal prohibits turns completely until a green signal or arrow appears.

Step-by-Step Solution

1
Identify the specific signal indication shown at the intersection.
The intersection signal is a solid red arrow pointing left.
Traffic signal laws distinguish between circular lens signals and directional arrow signals.
2
Recall the legal mandate for a solid red arrow signal.
A solid red arrow means stop and do not proceed or turn in the direction indicated by the arrow.
Red arrows are specifically installed to control protected or prohibited directional traffic movements.
3
Compare the solid red arrow rule with circular red light exceptions.
While circular red lights permit right turns (and left turns between one-way streets) after a full stop and yielding, solid red arrows strictly prohibit such turns.
Directional arrow prohibitions override general turn-on-red permissions for circular lights.

Key Concept

Solid Red Arrow Signal Mandatory Stop and Turn Prohibition
Question 96Question →

When driving through a work zone where an authorized human flagger is directing traffic, you are legally required to follow the flagger's hand signals even if they contradict a temporary electronic traffic signal.

Show answer & explanation

Answer: True

Answer

The statement is true. Directions given by an authorized traffic officer or work zone flagger override electronic traffic signals and static road signs.
The direction of an authorized traffic officer or work zone flagger always supersedes static signs and automated electronic traffic signals.

Step-by-Step Solution

1
Determine the hierarchy of authority among traffic control mechanisms.
Human traffic directors, including law enforcement officers and designated construction flaggers, occupy the highest priority level in traffic management.
Human controllers actively manage live hazards, lane closures, and emergency conditions that automated signal timers cannot dynamically adapt to.
2
Apply the precedence rule to the scenario described.
The driver must yield to the human flagger's signal rather than the electronic traffic light.
Disregarding a flagger's direction to follow a light creates severe safety hazards for road workers and other motorists.

Key Concept

Precedence of Traffic Officer and Flagger Directions
Question 97Question →

While traveling through a designated work area, a motorist approaches an intersection equipped with an octagonal red STOP sign. A uniformed traffic control officer stationed in the intersection explicitly motions for the driver to proceed through without stopping. Which of the following actions is the driver legally required to take?

Show answer & explanation

Answer: Follow the traffic control officer's hand signals and proceed through the intersection without stopping.

Answer

The driver must follow the traffic control officer's manual hand signals and proceed through the intersection without stopping.
Directions given by a law enforcement or authorized traffic control officer manually guiding vehicles take precedence over all static regulatory signs and automatic signals. When an officer motions to proceed, drivers must comply with the officer's signal without stopping at the STOP sign.

Step-by-Step Solution

1
Identify the conflict between traffic control devices and personnel.
Recognize that a static regulatory STOP sign is present alongside an active traffic control officer directing traffic.
Traffic laws define clear priority rules when human traffic directors interact with static signs or signals.
2
Apply the rule of traffic officer priority.
The officer's manual signals take precedence over standard regulatory control devices, including STOP signs.
Law enforcement officer directions supersede static signs to ensure safety and resolve temporary traffic situations dynamically.

Key Concept

Traffic Officer Priority over Regulatory Controls
Estimated Time:1m 0s
Question 98Question →

Drivers are legally permitted to stop their vehicle inside a pavement-marked 'KEEP CLEAR' zone in front of a fire station entrance when waiting in a traffic queue for a red light.

Show answer & explanation

Answer: False

Answer

False. Drivers must keep 'KEEP CLEAR' pavement markings completely unobstructed at all times, regardless of traffic congestion or traffic signal status, to ensure emergency vehicles can exit immediately.
The statement is false because pavement markings designating a 'KEEP CLEAR' zone in front of emergency facilities mandate that drivers must never enter the marked zone unless they can clear it completely without stopping.

Step-by-Step Solution

1
Identify the purpose of 'KEEP CLEAR' pavement markings in special zones.
These markings indicate areas that must remain open for emergency vehicles, transit vehicles, or highway access points.
Fire station driveway zones require unimpeded access 24/7 for emergency response units.
2
Apply traffic queuing rules to marked special zones.
Drivers approaching traffic queues must stop prior to entering the 'KEEP CLEAR' box unless there is sufficient room on the far side to clear the entire marked zone.
Stopping inside the marked zone creates a critical hazard by blocking emergency egress.

Key Concept

Special Zone 'KEEP CLEAR' Pavement Marking Compliance
Question 99Question →

Traffic guide signs with a brown background are used to inform drivers about upcoming motorist services such as gas, food, and lodging.

Show answer & explanation

Answer: False

Answer

False
The statement is false because brown signs denote parks, recreational facilities, and cultural landmarks. Blue signs are used for motorist services such as gas, food, and lodging.

Step-by-Step Solution

1
Identify the standard color-coding system for guide and informational signs.
Brown signs represent public recreation, scenic, and cultural areas. Blue signs indicate motorist services.
Standardized color conventions allow drivers to quickly interpret the general category of highway information.

Key Concept

Traffic Guide Sign Background Color Conventions
Question 100Question →

A driver traveling on a rural two-lane road is following a slow-moving tractor. The centerline on the driver's side is a broken yellow line, but a railroad crossing sign indicates tracks are located 80 feet ahead. Which of the following statements correctly describes the legal passing rule in this situation?

Show answer & explanation

Answer: The driver must not attempt to pass because overtaking is legally prohibited within 100 feet of a railroad crossing, regardless of lane markings.

Answer

The driver must not attempt to pass because overtaking is legally prohibited within 100 feet of a railroad crossing, regardless of lane markings.
Although a broken yellow line generally permits passing when safe, statutory traffic safety laws prohibit passing or driving on the left side of the roadway within 100 feet of a railroad crossing, intersection, bridge, or tunnel. Since the vehicle is 80 feet from the tracks, overtaking is illegal.

Step-by-Step Solution

1
Identify the standard rule for broken yellow centerline markings.
A broken yellow line indicates that passing is generally permitted when traffic is clear.
Broken yellow lines separate opposing traffic lanes where passing maneuvers are typically allowed.
2
Evaluate statutory passing restrictions near hazardous locations.
Traffic safety regulations restrict passing within 100 feet of intersections, railroad crossings, bridges, or tunnels.
Hazardous road features create high collision risk, superseding general pavement marking permissions.
3
Apply the 100-foot buffer requirement to the distance in the scenario (80 feet).
Because 80 feet is less than the mandatory 100-foot safety buffer, initiating a pass is illegal.
Statutory distance limits take precedence over standard lane line markings.

Key Concept

Statutory Passing Restrictions Near Railroad Crossings and Intersections
PreviousPage 5 / 25Next
Traffic Signs, Signals, and Road Markings Practice Questions — DMV Permit Practice Test — Page 5 | Examkin