Examkin

Question

Difficulty: EasyStatic Hazards

Match each static road hazard with the primary safety precaution a driver must take when approaching it.

  • Parked vehicles along a busy shopping streetReduce speed, leave sufficient door-width clearance, and watch for emerging pedestrians
  • Automatic half-barrier railway level crossingStop behind the stop line when the red twin flashing lights activate
  • Temporary roadworks narrowing your lane of the carriagewayFollow temporary signs, reduce speed, and be prepared to yield to oncoming traffic
  • Blind T-junction obscured by high hedges and wallsCreep forward slowly using the 'peep and creep' method until visibility is clear

Answer

Parked vehicles along a busy shopping street matches with reducing speed, leaving door-width clearance, and watching for pedestrians; Automatic half-barrier railway level crossing matches with stopping behind the line when red flashing lights activate; Temporary roadworks narrowing the lane matches with following temporary signs, reducing speed, and preparing to yield to oncoming traffic; Blind T-junction obscured by high hedges matches with creeping forward slowly using the peep and creep method until visibility is clear.
Each static road hazard requires an early, specific precautionary response aligned with the UK Highway Code: parked vehicles require clearance and speed reduction for pedestrian safety; level crossings demand immediate stopping upon warning light activation; roadwork bottlenecks require following temporary signs and yielding priority when the obstruction is on your side; and blind junctions necessitate cautious creeping forward to establish clear view before committing.

Step-by-Step Solution

1
Identify the primary risk associated with parked vehicles on urban roads.
The main risks are opening car doors and pedestrians emerging from blind spots between vehicles.
Drivers must leave at least a car door's width and travel at a speed that allows stopping safely.
2
Determine the legal and safety protocol for level crossings.
Twin flashing red lights and warning sounders indicate an approaching train.
Drivers must halt before the stop line and never attempt to cross once signals activate.
3
Assess right of way and positioning at carriageway narrowing due to roadworks.
An obstruction on your side of the carriageway requires giving way to oncoming traffic unless controlled by signals.
Following temporary signage ensures orderly traffic flow through restricted spaces.
4
Apply the observational procedure for junctions with severely restricted sightlines.
The 'peep and creep' technique brings the vehicle forward millimeter by millimeter until a clear view is obtained.
Moving slowly minimizes risk to passing vehicles while improving driver view.

Key Concept

Recognising static road hazards and applying corresponding Highway Code precautionary measures
Estimated Time:1m 0s
Rate this question

Topics

Static Hazards

More questions from this topic