Examkin

Question

Difficulty: HardWaiting and Parking

Under the UK Highway Code, drivers must observe statutory distance limits and apply specific mechanical control procedures when leaving or stopping a vehicle in varied roadway environments. Match each parking or stopping situation with its corresponding legal requirement or physical control procedure.

  • Parking facing uphill on a road with a kerbTurn the front wheels away from the kerb and select first gear
  • Parking facing downhill on a road with a kerbTurn the front wheels towards the kerb and select reverse gear
  • Stopping on an Urban Clearway during its operational hoursStop only for the duration required to set down or pick up passengers
  • Parking adjacent to a street junction without marked baysMaintain a clearance of at least 10 metres (32 feet) from the intersection

Answer

Each stopping situation matches its statutory requirement: parking uphill with a kerb requires turning the front wheels away from the kerb and selecting first gear; parking downhill with a kerb requires turning the front wheels towards the kerb and selecting reverse gear; an active Urban Clearway permits stopping only briefly to set down or pick up passengers; and parking near an intersection requires maintaining at least 10 metres (32 feet) of clearance.
The pairings correctly reflect statutory rules in The Highway Code: Rules 240 and 243 establish that vehicles must maintain at least 10 metres clearance from a junction and may only stop on an active Urban Clearway to drop off or collect passengers. Rule 252 specifies that hill parking requires turning wheels away from the kerb in first gear when uphill, and towards the kerb in reverse gear when downhill.

Step-by-Step Solution

1
Differentiate mechanical hill-parking requirements based on slope direction and kerb presence
Identified that uphill parking requires wheels angled away from the kerb with first gear engaged, whereas downhill parking requires wheels angled towards the kerb with reverse gear engaged.
This uses the kerb as a physical chock while placing engine compression in opposition to potential gravitational roll.
2
Determine statutory location prohibitions and clearway exceptions under The Highway Code
Identified that Urban Clearways allow passenger boarding/alighting only during operational hours, and junction clearance mandates a minimum 10-metre buffer.
Highway Code Rules 240 and 243 prohibit parking near junctions to protect sightlines and restrict stopping on clearways to maintain unimpeded traffic flow.

Key Concept

Statutory parking distances, clearway restrictions, and hill-parking mechanical procedures under UK Highway Code Rules 239 to 252.
Estimated Time:1m 30s
Rate this question

Topics

Waiting and Parking

More questions from this topic