You intend to turn your vehicle around by reversing into an opening on the left side of the road. What is the correct sequence of actions required to carry out this manoeuvre safely and in line with the Highway Code?
- 1Drive past the junction, stop parallel to the kerb roughly one vehicle length beyond the corner, and secure the vehicle.
- 2Select reverse gear to activate reversing lights and conduct a full 360-degree all-round observation, checking all mirrors and blind spots.
- 3Begin reversing slowly while looking primarily through the rear window, continuously scanning all around and monitoring front-end outward swing.
- 4Straighten the steering once parallel to the kerb inside the side road, stop well clear of the main junction, and apply the parking brake.
Answer
The correct sequence begins with positioning and securing the vehicle past the junction, followed by selecting reverse gear and conducting a full 360-degree observation, then reversing slowly while monitoring rear view and front swing, and finally straightening up well clear of the junction and securing the vehicle.
A safe reversing manoeuvre must always follow a structured routine: correct initial positioning past the junction, preparing the vehicle and completing thorough 360-degree checks before moving, continuous observation during the turn with attention to front-end swing, and finishing well clear of the junction.
Step-by-Step Solution
Key Concept
Safe observation routine, vehicle positioning, and hazard management during reversing manoeuvres
Estimated Time:1m 30s