Question

Difficulty: EasyBuses and Coaches

Match each bus-related road scenario or marking to the correct rule or driver action required by the Highway Code.

  • A bus signalling right while stationary at a built-up bus stopGive priority and allow the vehicle to pull out into the traffic stream when safe
  • A contraflow bus lane layoutBuses travel in the opposite direction to the surrounding one-way traffic flow
  • A solid single white line bordering a with-flow bus laneGeneral traffic must not cross or drive within the lane during operational hours
  • A broken white line section across a bus lane near a junctionGeneral traffic is permitted to cross the lane to turn left at the approaching side road

Answer

A bus signalling right at a stop matches giving priority when safe; a contraflow bus lane matches buses travelling opposite to one-way traffic; a solid white line matches prohibiting general traffic during operational hours; and a broken white line section matches permitting vehicles to cross to turn left at a junction.
Each bus-related scenario aligns directly with UK Highway Code rules: drivers should give way to buses signalling right from bus stops; contraflow lanes carry buses opposite to one-way traffic; solid white lines demarcate operating bus lane boundaries that other vehicles must not enter; and broken white lines allow vehicles to cross to turn left.

Step-by-Step Solution

1
Identify the rule for buses signalling to pull out from stops
Recognise that drivers should ease off and allow the bus to merge when safe.
Rule 223 of the Highway Code advises drivers to give priority to buses signalling to leave stops.
2
Identify the definition and layout of a contraflow bus lane
Match it to buses travelling in the opposite direction to general one-way traffic.
Contraflow lanes run contrary to the surrounding traffic direction to speed up public transport journeys.
3
Identify the meaning of solid versus broken road markings along bus lanes
Match solid lines to lane boundary restrictions and broken lines to permissible crossing points for left turns.
Solid lines indicate restrictions during operational hours, while broken line sections allow necessary junction manoeuvres.

Key Concept

Highway Code rules, road markings, and priority requirements concerning buses and coaches.
Estimated Time:1m 0s
Rate this question