Examkin

Soru

Zorluk: OrtaChronological Sequencing and Transitional Markers

In an environmental sustainability broadcast, a workshop facilitator provides oral instructions for assembling a community biosand water filtration column:

"To construct the filtration column, you will eventually install the biological diffuser plate across the top rim once the fine silica sand layer is fully leveled. Before introducing any silica sand, however, ensure you insert the perforated collection tube into the drainage outlet, which must be done immediately after placing the coarse gravel base at the container's bottom. Finally, upon securing the diffuser plate in position, fill the reservoir with raw water to initiate bio-layer cultivation."

Based on the transitional markers and instructions in the broadcast, in which chronological order should these assembly steps be performed from earliest to latest?

  1. 1Place the coarse gravel base at the bottom of the container
  2. 2Insert the perforated collection tube into the drainage outlet
  3. 3Install the biological diffuser plate across the top rim
  4. 4Fill the reservoir with raw water to begin bio-layer cultivation

Cevap

Place the coarse gravel base at the bottom of the container → Insert the perforated collection tube into the drainage outlet → Install the biological diffuser plate across the top rim → Fill the reservoir with raw water to begin bio-layer cultivation
The correct sequence begins with placing the gravel base at the bottom, followed immediately by inserting the perforated collection tube into the drainage outlet ('immediately after placing the coarse gravel base' and 'before introducing any silica sand'). Next, once the sand is leveled, the biological diffuser plate is installed across the rim ('once the fine silica sand layer is fully leveled'). Lastly, the column is filled with raw water ('Finally, upon securing the diffuser plate in position').

Adım Adım Çözüm

1
Identify the foundation step by analyzing temporal markers modifying the base container setup.
Placing the coarse gravel base at the container bottom is established as the starting step because the drainage tube must be placed 'immediately after' it.
The marker 'immediately after' establishes that gravel placement precedes the insertion of the drainage tube.
2
Determine the second action by parsing the pre-requisite marker governing sand introduction.
Inserting the perforated collection tube into the drainage outlet happens second.
The speaker states 'before introducing any silica sand... ensure you insert the perforated collection tube,' positioning this step before subsequent sand leveling.
3
Locate the transitional marker indicating completion of intermediate layers.
Installing the biological diffuser plate across the top rim takes place third.
The conditional marker 'once the fine silica sand layer is fully leveled' indicates that the diffuser plate is installed only after the sand layer is prepared.
4
Identify the concluding action governed by terminal markers.
Filling the reservoir with raw water is the fourth and final step.
The markers 'Finally' and 'upon securing the diffuser plate' explicitly denote the concluding action of the sequence.

Anahtar Kavram

Decoding non-linear oral sequencing using transitional markers (before, immediately after, once, upon, finally)
Tahmini Süre:1m 30s
Bu soruyu puanla

Konular

Chronological Sequencing and Transitional Markers

Bu konudan daha fazla soru