Examkin

Soru

Zorluk: OrtaIdentifying Implied Meanings

Passage:
Before securing continuous welded steel rails to concrete ties, maintenance crews mechanically stretch or heat the metal until it reaches a calculated neutral temperature, which represents the midpoint between regional winter and summer extremes. Fastening rails below this designated temperature leads to severe tensile stress during winter freezes, risking track fractures. Conversely, anchoring rails without accounting for thermal expansion can cause massive compressive stress during summer heat waves, forcing the track to buckle outward.

Based on the passage, what is implied about the purpose of establishing a neutral rail temperature?

  1. A
    Concrete ties require heated steel to create a permanent chemical bond during installation.
  2. It minimizes the risk of structural failure by accommodating both contraction and expansion across seasonal extremes.Cevap
  3. C
    Fastening rails below the designated baseline leads directly to severe tensile stress.
  4. D
    Maintenance crews must continuously reheat and restretch the tracks before every seasonal transition.

Cevap

Establishing a neutral rail temperature minimizes structural failure by balancing the physical stresses of seasonal expansion and contraction.
The author contrasts two failure scenarios: cold-induced tensile fractures and heat-induced compressive buckling. By establishing a neutral baseline at the exact midpoint of these seasonal extremes before securing the rails, crews ensure the steel remains within safe stress limits during both thermal expansion and contraction.

Adım Adım Çözüm

1
Identify the stated problems associated with temperature extremes.
Cold temperatures cause tensile stress leading to fractures, while hot temperatures cause compressive stress leading to buckling.
Understanding the opposing failure modes is necessary to determine why a midpoint is selected.
2
Analyze the role of the neutral temperature.
The neutral temperature is defined as the calculated midpoint between regional summer and winter extremes.
Connecting the midpoint calibration to the two failure modes reveals the functional objective.
3
Deduce the unstated purpose of the procedure.
Installing steel at the midpoint balances the range of thermal movement, allowing the track to tolerate both contraction and expansion without exceeding physical tolerance limits.
This unstated synthesis logically explains why technicians condition the metal before anchoring it.

Anahtar Kavram

Inferring unstated functional purpose from opposing mechanical cause-and-effect relationships.
Tahmini Süre:1m 0s
Bu soruyu puanla

Konular

Identifying Implied Meanings

Bu konudan daha fazla soru