Examkin

Soru

Zorluk: OrtaQuantitative Detail Extraction

Read the following technical briefing:

During winter flight operations, ground crews apply specialized deicing and anti-icing fluids to ensure aerodynamic safety. Type I deicing fluid, applied heated to melt accumulated snow, provides a maximum holdover protection time of 15 minutes in light freezing drizzle. For prolonged ground delays in freezing precipitation, crews apply Type II fluid, which maintains an effective holdover duration of 45 minutes. For severe winter conditions with heavy freezing rain, advanced Type IV fluid is utilized, delivering up to 80 minutes of surface protection. Meanwhile, standard Type III fluid is reserved for commuter aircraft with rotation speeds below 100 knots.

Based on the technical briefing above, match each aircraft fluid type with its correct operational quantitative specification.

  • Type I fluid15 minutes maximum holdover protection
  • Type II fluid45 minutes effective holdover duration
  • Type III fluidRotation speeds below 100 knots
  • Type IV fluidUp to 80 minutes of surface protection

Cevap

Type I fluid matches 15 minutes maximum holdover protection; Type II fluid matches 45 minutes effective holdover duration; Type III fluid matches rotation speeds below 100 knots; Type IV fluid matches up to 80 minutes of surface protection.
Each fluid type is matched strictly to its explicitly stated metric in the passage: Type I is given as 15 minutes, Type II as 45 minutes, Type III as under 100 knots rotation speed, and Type IV as up to 80 minutes.

Adım Adım Çözüm

1
Locate the quantitative value associated with Type I fluid in the stimulus.
Identified '15 minutes' as the holdover protection time for Type I fluid.
Direct factual extraction of the first quantitative specification.
2
Locate the quantitative duration tied to Type II fluid.
Identified '45 minutes' as the holdover duration for Type II fluid.
Direct factual extraction of the second quantitative specification.
3
Locate the operating constraint stated for Type III fluid.
Identified 'rotation speeds below 100 knots' as the criterion for Type III fluid.
Distinguishing between time durations and operational speed thresholds.
4
Locate the maximum protection duration specified for Type IV fluid.
Identified '80 minutes' as the duration for Type IV fluid.
Direct factual extraction of the final quantitative specification.

Anahtar Kavram

Quantitative Detail Extraction from Technical Text
Tahmini Süre:1m 0s
Bu soruyu puanla

Konular

Quantitative Detail Extraction

Bu konudan daha fazla soru