Examkin

Soru

Zorluk: OrtaPower Drills and Drivers

An automotive technician is installing an interior dashboard trim panel and must drive several small machine screws into soft plastic retaining bosses. To secure the screws firmly without stripping the plastic threads or snapping the fastener heads, which drill/driver adjustment should the technician make?

  1. A
    Lock the collar into continuous drill mode and run the tool at maximum rotational speed
  2. Rotate the adjustable torque clutch collar to a low numbered detent settingCevap
  3. C
    Use an undersized cross-slot driver bit and apply heavy axial force to seat the fastener
  4. D
    Engage hammer-drill mode so axial percussion pulses can drive the fastener rapidly

Cevap

Rotate the adjustable torque clutch collar to a low numbered detent setting
Modern cordless drill/drivers are equipped with an adjustable torque clutch collar featuring numbered settings. Selecting a low numerical setting limits the maximum rotational torque delivered to the fastener. When the screw seats and resistance rises to the preset threshold, the internal spring-loaded clutch slips with an audible clicking sound, immediately halting rotation and preventing thread damage in soft materials like plastic or sheet metal.

Adım Adım Çözüm

1
Identify the material properties and fastener requirements
The workpiece consists of soft plastic retaining bosses, which require strict torque regulation to avoid stripped internal threads.
Fasteners in soft substrates easily strip if the driving tool delivers more rotational torque than the material can withstand.
2
Select the appropriate power drill/driver mechanical control
The adjustable slip clutch collar regulates output torque by disengaging the chuck via spring-loaded ball detents when the target resistance is reached.
Lower numbers on the clutch ring correspond to lower slip torque thresholds, providing maximum protection against over-tightening.

Anahtar Kavram

Drill/driver torque clutch collar operation and torque regulation for delicate fastening
Tahmini Süre:1m 0s
Bu soruyu puanla

Konular

Power Drills and Drivers

Bu konudan daha fazla soru