An aerospace engineering team is modifying the solid metal thermal struts that connect a heat-generating electronics module to a cooling radiator. Match each proposed design modification with its specific physical effect on the rate of conductive heat transfer through the strut, assuming the temperature difference remains constant.
- Changing the strut material from stainless steel to copperSubstantially increases the rate of heat flow due to a higher intrinsic thermal conductivity.
- Using two identical struts in parallel instead of a single strutDoubles the rate of heat flow by doubling the total cross-sectional area available for conduction.
- Increasing the overall length of the strut by a factor of twoHalves the rate of heat flow by doubling the physical distance the thermal energy must travel.
- Machining a hollow core through the center of the strutDecreases the rate of heat flow by reducing the effective cross-sectional area of the solid material.
Cevap
Changing to copper increases conductivity; using parallel struts doubles the area; increasing length halves the transfer rate; and machining a hollow core reduces the cross-sectional area.
The rate of conductive heat transfer through a solid object is determined by its material's thermal conductivity, the cross-sectional area perpendicular to the heat flow, and the length of the pathway. Adjusting these physical parameters directly alters the heat flow according to proportional relationships.
Adım Adım Çözüm
Anahtar Kavram
Variables in Fourier's Law of Heat Conduction