Examkin

Soru

Zorluk: Çok zorFuel and Air Intake Systems

During hard acceleration, a turbocharged engine severely loses power and emits thick black exhaust smoke. Which of the following intake system failures most likely caused this specific condition?

  1. A ruptured intake boost tube located between the mass airflow sensor and the throttle bodyCevap
  2. B
    A disconnected intake manifold vacuum hose allowing unmetered ambient air to enter the engine
  3. C
    A severely clogged fuel injector restricting the volume of fuel entering the combustion chamber
  4. D
    A stuck-open fuel pressure regulator that continuously returns maximum fuel volume to the gas tank

Cevap

A ruptured intake boost tube located between the mass airflow sensor and the throttle body
The correct answer identifies a condition where metered air is lost after being measured. The mass airflow sensor calculates the incoming air volume and commands the fuel injectors to deliver the appropriate fuel. Because the boost tube is ruptured, the pressurized air escapes into the atmosphere before reaching the engine cylinders. The engine receives the heavy fuel volume but lacks the corresponding air, creating a severely rich air-fuel mixture that directly produces the thick black smoke.

Adım Adım Çözüm

1
Analyze the vehicle symptoms described in the scenario
The engine loses power and emits thick black exhaust smoke specifically during hard acceleration
Identifying the visual and performance symptoms is the mandatory first step in automotive diagnostics
2
Translate the exhaust symptom into an air-fuel mixture condition
Thick black smoke indicates unburned fuel passing through the exhaust, which means the engine is running in an excessively rich condition
Black smoke is the universal diagnostic indicator for a rich air-fuel mixture (too much fuel compared to the amount of air)
3
Evaluate how a turbocharged system measures air and commands fuel
The mass airflow (MAF) sensor measures air entering the intake system and signals the engine computer to inject the corresponding stoichiometric amount of fuel
Understanding the sequence of electronic fuel injection is required to pinpoint where the air-fuel ratio is being disrupted
4
Determine the mechanical effect of a post-MAF intake rupture under boost pressure
Metered, pressurized air escapes through the rupture into the atmosphere, but the computer still delivers the heavy fuel volume for the air that was originally measured
This specific failure explains why there is a massive surplus of fuel (causing the severe rich condition and black smoke) during acceleration when the turbocharger builds pressure

Anahtar Kavram

Diagnosing Forced Induction Air-Fuel Mixture Imbalances
Bu soruyu puanla

Konular

Fuel and Air Intake Systems

Bu konudan daha fazla soru