Examkin

Soru

Zorluk: KolayPower Grinders

When the abrasive wheel of a bench grinder becomes grooved or clogged with metal particles (loaded), which maintenance procedure should be performed to clean and flatten the cutting surface?

  1. A
    Applying lubricating oil to the grinding face
  2. Dressing the wheel with a wheel dresserCevap
  3. C
    Increasing the spindle operating speed
  4. D
    Scraping the spinning surface with a steel file

Cevap

Dressing the wheel with a wheel dresser
Dressing the wheel with a dedicated wheel dresser cleans out loaded metal shavings and shears off dull abrasive grains, simultaneously truing the face and exposing fresh, sharp cutting edges.

Adım Adım Çözüm

1
Diagnose the grinding wheel surface condition
The wheel face is identified as loaded (clogged with metal) or grooved from uneven wear
Grinding soft metals or localized pressure clogs abrasive pores and degrades grinding performance
2
Select the correct reconditioning process
Apply a mechanical star-wheel dresser or diamond dresser across the wheel face supported on the tool rest
Dressing fractures dull abrasive particles, strips away embedded swarf, and trues the wheel geometry

Anahtar Kavram

Abrasive wheel dressing and truing
Tahmini Süre:45s
Bu soruyu puanla

Konular

Power Grinders

Bu konudan daha fazla soru