Examkin

Soru

Zorluk: KolayLubrication System

When inspecting an automotive engine's lubrication system, a technician needs to verify the motor oil level. In what sequential order should the technician perform the steps to accurately check the oil level using the dipstick?

  1. 1Park the vehicle on level ground and shut off the engine.
  2. 2Remove the dipstick and wipe the blade clean with a rag.
  3. 3Reinsert the clean dipstick completely into the guide tube.
  4. 4Withdraw the dipstick and observe the oil level between the indicator marks.

Cevap

The correct sequence begins by parking the vehicle on level ground and turning off the engine, followed by pulling the dipstick and wiping it clean, reinserting the dipstick fully into the tube, and finally removing the dipstick to read the oil level between the markings.
The correct procedure requires first parking on a level surface with the engine off so all oil drains into the oil pan. Next, pulling and wiping the dipstick removes residual oil splashes. Reinserting the dipstick fully and then pulling it a second time allows for a clear, accurate reading between the crosshatches or indicator holes.

Adım Adım Çözüm

1
Ensure the vehicle is on level ground with the engine turned off.
The engine oil settles completely into the oil pan sump without tilting.
Uneven ground or a running engine causes oil to slosh or circulate, resulting in inaccurate high or low readings.
2
Withdraw the dipstick from the tube and wipe it clean with a lint-free rag.
Splashed oil from previous engine operation is removed from the measurement markings.
Wiping provides a clean baseline so residual splash is not mistaken for the true level.
3
Reinsert the clean dipstick all the way down into the dipstick tube until fully seated.
The measuring end submerges into the settled oil reservoir to the proper baseline depth.
If the dipstick is not pushed in all the way, the measurement will read falsely low.
4
Pull the dipstick back out and inspect where the oil film stops on the hash marks.
The exact oil level is clearly identified relative to the Add and Full indicators.
This final check provides an accurate volume reading of the engine's lubrication reservoir.

Anahtar Kavram

Accurate engine oil level measurement procedure using a dipstick
Tahmini Süre:45s
Bu soruyu puanla

Konular

Lubrication System

Bu konudan daha fazla soru