Examkin

Soru

Zorluk: ZorStriking Tools

During an automotive assembly procedure in a shop bay where combustible vapors may be present, a technician must drive a steel dowel pin into an aluminum housing without marring the adjacent precision gasket surfaces or causing the hammer to bounce off the workpiece. Which tool combination and technique best fulfills all safety and mechanical requirements?

  1. A
    A hardened steel ball-peen hammer struck directly against the steel dowel pin with rapid light taps
  2. A brass drift punch struck squarely by a shot-filled dead-blow hammerCevap
  3. C
    A curved-claw carpenter hammer struck against a tapered steel cold chisel
  4. D
    A cast-iron cross-peen sledgehammer swung with high velocity at a glancing angle

Cevap

A brass drift punch struck squarely by a shot-filled dead-blow hammer
Using a brass drift punch combined with a shot-filled dead-blow hammer satisfies all constraints: brass is a softer, non-ferrous metal that eliminates impact spark hazards and will not mar steel pins or aluminum housings, while the internal shot inside the dead-blow hammer absorbs rebound force to prevent the tool from bouncing into nearby machined surfaces.

Adım Adım Çözüm

1
Evaluate the material hardness and non-sparking shop safety requirements.
Identify that direct steel-on-steel impact can spark near combustible vapors and deform precision mating surfaces.
Non-ferrous materials such as brass absorb excess surface stress without sparking or galling the harder steel dowel or softer aluminum housing.
2
Analyze striking dynamics and rebound control.
Select a dead-blow hammer containing loose steel shot or composite material inside the head.
When a dead-blow hammer strikes, the internal shot shifts forward immediately after contact, canceling the rebound shock and transferring maximum sustained kinetic energy into the punch.
3
Combine the sacrificial intermediate tool with the appropriate striking instrument.
Pairing a brass drift with a dead-blow hammer satisfies non-sparking safety, surface protection, and anti-rebound criteria.
This setup protects the technician, surrounding gasket surfaces, and the integrity of the interference fit.

Anahtar Kavram

Striking tool selection based on material pairing, spark mitigation, and rebound damping
Tahmini Süre:1m 30s
Bu soruyu puanla

Konular

Striking Tools

Bu konudan daha fazla soru