Examkin

Soru

Zorluk: OrtaMeasuring and Layout Tools

A machinist needs to locate and scribe the exact center lines on the circular end face of a solid round steel bar before turning it on a lathe. Which component of a combination square set is specifically designed for this layout operation?

  1. A
    Protractor head
  2. Center headCevap
  3. C
    Square head
  4. D
    Depth gauge attachment

Cevap

Center head
A center head mounts onto the steel rule of a combination square with a precision 90-degree V-slot. When placed flush against the outer perimeter of a cylindrical bar or shaft, the edge of the blade automatically bisects the circle along its diameter. Scribing two distinct diameter lines creates an intersecting crosshair at the exact center of the workpiece.

Adım Adım Çözüm

1
Identify the geometry of the workpiece and the required layout task.
The workpiece has a circular cross-section, and the task requires locating its geometric center point.
Matching the workpiece shape and layout requirement prevents the selection of tools suited only for flat or angular layout.
2
Determine which attachment of a standard combination set aligns with cylindrical workpieces.
The center head features a 90-degree V-notch that seats against the outer curvature of round stock, positioning the blade along the diameter.
Scribing two diameter lines at different angles produces an intersection at the true center of the cylinder.

Anahtar Kavram

Combination Square Attachments and Radial Layout
Tahmini Süre:1m 0s
Bu soruyu puanla

Konular

Measuring and Layout Tools

Bu konudan daha fazla soru