Examkin

Connection Problems

2 soru

Soru 1Soru →

Match each set of disconnected components with the correct rotational transformation required for the insert piece so its connection tab properly aligns and interlocks with the base plate's notch. Assume the base plate remains stationary.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Set 1: Base plate with notch 'P' on its top edge; Insert piece with tab 'P' on its right edge.
Set 2: Base plate with notch 'Q' on its right edge; Insert piece with tab 'Q' on its top edge.
Set 3: Base plate with notch 'R' on its left edge; Insert piece with tab 'R' on its left edge.

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Set 1 requires a 90° clockwise rotation; Set 2 requires a 90° counterclockwise rotation; Set 3 requires a 180° rotation.
Each pair is matched by determining the required final position for the insert's tab to align with the base's notch, and then identifying the specific rotational transformation needed to move the tab from its starting position to that required final position.

Adım Adım Çözüm

1
Analyze Set 1 (notch on top, tab on right).
The tab must move from the right edge to the bottom edge.
To fit into a notch on the top of the base plate, the insert must connect from above, requiring its tab to be on the bottom.
2
Determine rotation for Set 1.
90° clockwise rotation is required.
Rotating a right-facing tab 90° clockwise turns it to face downward.
3
Analyze Set 2 (notch on right, tab on top).
The tab must move from the top edge to the left edge.
To fit into a notch on the right of the base plate, the insert must connect from the right, requiring its tab to be on the left.
4
Determine rotation for Set 2.
90° counterclockwise rotation is required.
Rotating an upward-facing tab 90° counterclockwise turns it to face left.
5
Analyze Set 3 (notch on left, tab on left).
The tab must move from the left edge to the right edge.
To fit into a notch on the left of the base plate, the insert must connect from the left side, requiring its tab to be on the right.
6
Determine rotation for Set 3.
180° rotation is required.
Rotating a left-facing tab 180° in either direction turns it to face right.

Anahtar Kavram

Mental Rotation and Connection Alignment
Tahmini Süre:1m 0s
Soru 2Soru →

Match each set of unassembled components with the correct description of their final assembled figure. Ensure all corresponding multi-point alignment markers perfectly match.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Öğeler

Set 1: A top semi-circle with markers X and Y (left to right) on its straight edge, and a bottom semi-circle with markers Y and X (left to right) on its straight edge.
Set 2: Two identical squares. Square A has two dot markers on its right-hand edge. Square B has two dot markers on its left-hand edge.
Set 3: A large square missing a rectangular corner section containing star markers, and a small rectangle with corresponding star markers on two adjacent corners.
Set 4: Two right triangles. Triangle 1 has diamond markers on its vertical leg. Triangle 2 has diamond markers on its horizontal leg.

Eşleşmeler

Cevabı ve açıklamayı göster

Cevap

Set 1 matches the full circle requiring a 180-degree rotation. Set 2 matches the horizontal rectangle requiring translation. Set 3 matches the solid large square. Set 4 matches the composite triangle requiring a 90-degree rotation.
Each component set contains specific geometries and multi-point markers that dictate exactly one assembly method. By tracing how the points must connect (X to X, dot to dot), we can determine whether the pieces require direct translation (sliding), a 90-degree rotation, or a 180-degree rotation to assemble the composite figure.

Adım Adım Çözüm

1
Analyze Set 1's semi-circles and their markers.
Identify that the X and Y markers are reversed relative to each other, necessitating a 180-degree rotation to align them.
Without rotation, X would align with Y, which is an incorrect multi-point connection.
2
Analyze Set 2's squares and their markers.
Identify that the markers are on the right edge of Square A and the left edge of Square B.
This means they can be pushed directly together side-by-side without rotation to form a rectangle.
3
Analyze Set 3's L-shaped geometry and small rectangle.
Identify that the small piece perfectly fills the cutout space in the large piece.
Matching the star markers slots the piece into the negative space, completing the square.
4
Analyze Set 4's right triangles.
Identify that the connection markers are on perpendicular legs (vertical vs. horizontal).
A 90-degree rotation is required to make a horizontal leg vertical (or vice versa) to align the diamond markers.

Anahtar Kavram

Multi-Point Alignment and Mental Rotation
Connection Problems Alıştırma Soruları — Armed Services Vocational Aptitude Battery (ASVAB) | Examkin