Examkin

Steering Systems

22 soru

Tüm türler22Çoktan seçmeli12Eşleştirme4Sıralama6
Soru 21Soru →

In a vehicle equipped with a conventional parallelogram steering linkage, rotational output from the steering gearbox is mechanically transferred through several linkage components to steer the front wheels. What is the correct order of mechanical force transfer from the steering gearbox sector shaft to the road wheels?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The pitman arm converts sector shaft rotation into lateral swinging motion, which shifts the center link across the chassis, transferring force through the tie-rod assemblies to pivot the steering knuckles and road wheels.
In a conventional parallelogram steering system, rotational motion from the steering gearbox sector shaft is first converted into lateral motion by the pitman arm. This swinging motion shifts the center link across the chassis. The center link then distributes lateral force to the inner and outer tie-rod assemblies, which push or pull the steering knuckles to pivot the wheel spindles on their ball joints.

Adım Adım Çözüm

1
Identify the direct mechanical output attached to the steering gearbox.
The pitman arm receives rotational torque from the sector shaft and converts it into a lateral swinging arc.
The sector shaft rotates when the gearbox worm and sector gears mesh, requiring a lever arm to initiate lateral motion.
2
Track where the swinging motion of the pitman arm is transferred.
The center link (relay rod) is pushed or pulled sideways across the vehicle chassis.
The center link connects the pitman arm on the driver side to the idler arm on the passenger side, forming a parallel track.
3
Determine the linkage component connecting the center link to the wheel assemblies.
Tie-rod assemblies carry lateral push/pull forces outward toward each wheel.
Inner and outer tie rods bridge the distance between the center link and the steering knuckles while accommodating suspension movement.
4
Identify the final pivot point that steers the road wheels.
The steering knuckles pivot on the ball joints, angling the spindles and wheel hubs.
The outer tie rod ends connect to the steering arms of the knuckles, forcing the wheels to turn along their steering axes.

Anahtar Kavram

Parallelogram Steering Linkage Motion Transfer
Tahmini Süre:1m 0s
Soru 22Soru →

A driver hears a distinct hissing noise from under the hood whenever the steering wheel is held firmly against the steering stop at full lock during a tight turn. Which component inside the hydraulic power steering pump opens to safely divert pressurized fluid and prevent hose rupture under this peak load condition?

Cevabı ve açıklamayı göster

Cevap: Pressure relief valve

Cevap

The pressure relief valve safely limits peak fluid pressure inside the power steering pump during full-lock conditions.
When the steering wheel is turned completely to full lock, the wheels reach their mechanical limit, stopping fluid flow through the gear. The resulting spike in hydraulic pressure forces the spring-loaded pressure relief valve open, allowing fluid to bypass back into the pump inlet to protect hoses and seals from rupturing.

Adım Adım Çözüm

1
Identify the operating condition described in the scenario
The steering system is at full lock (maximum wheel deflection against mechanical stops), causing hydraulic pressure to spike to its maximum threshold.
When the steering linkage reaches its mechanical travel limits, fluid flow through the steering gear is blocked, rapidly driving up system pressure.
2
Determine the protective mechanism designed for peak hydraulic pressure
A spring-loaded pressure relief valve located within the power steering pump flow control assembly opens.
Without a relief mechanism to recirculate high-pressure fluid back into the low-pressure pump reservoir, excessive hydraulic pressure would blow out seals or burst pressure lines.

Anahtar Kavram

Hydraulic power steering pump pressure regulation and relief mechanisms
Tahmini Süre:1m 0s
ÖncekiSayfa 2 / 2
Steering Systems Alıştırma Soruları — Armed Services Vocational Aptitude Battery (ASVAB) — Sayfa 2 | Examkin