Examkin

Fasteners and Building Materials

84 soru

Tüm türler84Çoktan seçmeli43Çoklu seçim4Sayısal8Eşleştirme18Sıralama9Kısa cevap2
Soru 81Soru →

When fastening softwoods such as pine or cedar in construction and shop framing, why are coarse-thread screws preferred over fine-thread screws?

Cevabı ve açıklamayı göster

Cevap: They have wider, deeper threads that bite securely into porous wood fibers to maximize holding power.

Cevap

Coarse-thread screws have wider, deeper threads that bite securely into porous wood fibers to maximize holding power.
Softwoods have low density and porous grain structures. Coarse-thread screws possess a larger thread pitch and deeper thread valleys, allowing more wood fibers to sit between the threads. This creates substantial mechanical interlock and high withdrawal resistance without stripping out the softwood.

Adım Adım Çözüm

1
Analyze the workpiece material properties
Softwoods (such as pine, fir, and cedar) have a less dense, fibrous, and porous grain structure compared to hardwoods or metals.
Fastener thread design must match the physical resistance and density of the base material.
2
Evaluate the mechanical interaction of coarse versus fine screw threads
Coarse threads have fewer threads per inch and deeper flutes, packing more wood fiber between thread crests. Fine threads have shallower cuts that easily strip the soft grain under torque.
Deeper thread engagement in soft fibers delivers superior withdrawal resistance and prevents spinning.
3
Identify the primary functional reason for selecting coarse-thread screws in softwoods
Coarse threads maximize grip and holding strength in softer woods by biting deeply between the loose grain fibers.
Matching thread pitch to material density ensures a rigid joint without stripping the hole.

Anahtar Kavram

Screw thread pitch selection based on material density and grain structure
Tahmini Süre:1m 0s
Soru 82Soru →

A mechanic is securing a suspension component using a threaded stud, a castellated nut, and a cotter pin. Place the following installation and locking steps in the correct chronological sequence from first to last.

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

The correct sequence is: (1) Thread and torque the castellated nut to the initial specification, (2) Inspect the alignment between the nut slots and the stud hole, (3) Tighten slightly further to align the nearest slot if needed, and (4) Insert the cotter pin and bend the prongs to lock the fastener.
Proper installation of a castellated nut requires seating the joint to base torque first, checking hole-to-slot alignment, advancing the nut only in the tightening direction to achieve alignment, and finally installing and spreading the cotter pin prongs to positively lock the assembly.

Adım Adım Çözüm

1
Torque the castellated nut to the lower end of the specified torque range.
The joint is properly seated under clamping force.
Fasteners must achieve sufficient clamping load before locking devices are installed.
2
Inspect the position of the nut slots relative to the drilled hole in the bolt or stud.
Determine if direct alignment exists or if further rotation is required.
A cotter pin cannot pass through unless a slot and the hole form an unobstructed passageway.
3
Rotate the nut clockwise slightly to bring the nearest slot into alignment with the hole.
The slot aligns with the hole while maintaining or slightly increasing proper torque.
Shop safety rules dictate that castellated nuts should never be loosened to align cotter pin holes, as loosening compromises joint preload.
4
Insert the cotter pin completely through the assembly and bend one prong over the end of the stud and the other around the side of the nut.
The nut is positively locked against rotational movement.
Positive mechanical locking prevents fastener loosening caused by vibration and dynamic operational loads.

Anahtar Kavram

Proper installation procedure and positive mechanical locking of castellated nuts using cotter pins.
Tahmini Süre:1m 0s
Soru 83Soru →

An automotive technician installing an alternator mounting bracket consults the service manual, which specifies an M10×1.5×40\text{M}10 \times 1.5 \times 40 hex cap screw. What does the value 1.51.5 represent in this standard metric fastener callout?

Cevabı ve açıklamayı göster

Cevap: The distance in millimeters between adjacent thread crests

Cevap

The value 1.5 represents the thread pitch, defined as the distance in millimeters between adjacent thread crests.
In standard metric fastener notation (M10 x 1.5 x 40), the letter 'M' indicates metric ISO thread profile, the first number (10) represents the nominal major diameter in millimeters, the second number (1.5) represents the thread pitch in millimeters between adjacent crests, and the final number (40) is the length of the bolt in millimeters.

Adım Adım Çözüm

1
Deconstruct the metric fastener callout notation M10 x 1.5 x 40 into its standard components.
'M' indicates metric ISO thread; '10' is nominal major diameter in millimeters; '1.5' is thread pitch; '40' is fastener shank length in millimeters.
Metric fastener specifications follow the standard format: Metric Designation + Major Diameter (mm) x Thread Pitch (mm) x Length (mm).
2
Determine the physical definition of thread pitch in metric fastener standards.
A thread pitch of 1.5 specifies that there is a 1.5 mm linear distance from the peak of one thread to the peak of the adjacent thread.
Unlike Imperial threads that count threads per inch (TPI), metric fasteners directly measure the axial distance between individual crests.

Anahtar Kavram

Metric fastener callout structure and thread pitch specification
Tahmini Süre:1m 0s
Soru 84Soru →

A mechanic is securing two steel plates together using a through-bolt, two flat washers, a split-ring lock washer, and a standard hex nut. In what sequential order should these hardware components and materials be assembled from the bolt head side to the nut side?

Öğeleri doğru sıraya koymak için sürükleyin

Cevabı ve açıklamayı göster

Cevap

First flat washer under bolt head, passed through the joined plates, followed by the second flat washer, the split-ring lock washer, and finally the hex nut.
In standard mechanical assembly, a through-bolted joint follows a specific hardware order: the bolt head holds a flat washer to distribute pressure; the bolt passes through the workpiece; the opposite side receives a second flat washer for load distribution, followed by the split-ring lock washer to maintain tension, and finishes with the hex nut.

Adım Adım Çözüm

1
Place the initial flat washer onto the bolt shank up to the bolt head.
Protects the front workpiece surface and distributes clamping force under the head.
Prevents head embedment into the material during tightening.
2
Insert the bolt assembly through the workpiece clearance holes.
Hardware spans the joint plates.
Aligns and joins the two structural components.
3
Slide the second flat washer over the threaded end against the workpiece.
Provides a smooth, wide bearing surface on the nut side.
Prevents the lock washer from digging into the softer workpiece material.
4
Slide the split-ring lock washer over the threads against the flat washer.
Prepares spring-tension retention.
Maintains constant tension against the nut to resist vibrational loosening.
5
Thread and torque the hex nut onto the bolt shank.
Compresses the lock washer and clamps the joint.
Develops the required clamping force across the entire fastener stack.

Anahtar Kavram

Through-bolt fastener assembly stack-up sequence and washer placement rules
Tahmini Süre:1m 0s
ÖncekiSayfa 5 / 5
Fasteners and Building Materials Alıştırma Soruları — Armed Services Vocational Aptitude Battery (ASVAB) — Sayfa 5 | Examkin