Electronic Components

211 soru

Tüm türler211 Çoktan seçmeli107 Doğru / Yanlış24 Sayısal27 Eşleştirme43 Boşluk doldurma10

An electric motor circuit experiences a momentary inrush current of 25 A when starting up, but drops to a steady operating current of 6 A during normal operation. Which protective device is specifically designed to tolerate this brief startup surge without opening the circuit while still protecting against prolonged overcurrent faults?

A fast-acting fuse

A slow-blow (time-delay) fuse

A parallel shunt resistor

A step-down transformer

Cevabı ve açıklamayı göster

Cevap: A slow-blow (time-delay) fuse

Cevap

A slow-blow (time-delay) fuse

Slow-blow (time-delay) fuses are specifically engineered to accommodate temporary, harmless current surges—such as inductive motor starting currents—by incorporating a thermal delay element. If the overcurrent condition persists beyond the brief startup interval or reaches dangerous short-circuit levels, the fuse element melts to isolate and protect the circuit.

Adım Adım Çözüm

Analyze the electrical load characteristics of the motor.

The motor draws a high transient inrush current (25 A) that significantly exceeds its continuous operating current (6 A).

Inductive loads like electric motors require substantial starting torque and draw temporary surge currents before establishing normal operating counter-electromotive force.

Determine the required response time characteristics for the protective device.

The device must absorb brief current spikes without nuisance tripping, yet still interrupt sustained overloads.

Protective devices must match circuit operational profiles to avoid unnecessary service interruptions while maintaining safety.

Identify the component designed with an intentional time lag mechanism.

A slow-blow (time-delay) fuse provides the necessary delay for inductive surges while maintaining full overload protection.

Time-delay fuses utilize dual-element or thermal delay construction that allows momentary overloads to pass harmlessly but melts if current remains high.

Anahtar Kavram

Time-delay protective devices and motor inrush current handling

Tahmini Süre:1m 0s

Soru 162Soru →

When inspecting a circuit board, a technician observes a four-band resistor with the color sequence Red, Red, Orange, and Gold. What is the rated resistance value and tolerance of this resistor?

2.2\text{ k}\Omega \pm 5\%

22\text{ k}\Omega \pm 5\%

220\ \Omega \pm 5\%

223\ \Omega \pm 5\%

Cevabı ve açıklamayı göster

Cevap: $22\text{ k}\Omega \pm 5\%$

Cevap

22\text{ k}\Omega \pm 5\%

According to standard electronic color code rules, the first band (Red = 2) and second band (Red = 2) give the two significant digits 22. The third band (Orange =

10^3

) multiplies this base number by

1{}000

, resulting in

22{}000\ \Omega

(

22\text{ k}\Omega

). The fourth band (Gold) indicates a tolerance rating of

\pm 5\%

Adım Adım Çözüm

Determine the first two significant digits from the first and second color bands.

Band 1 (Red) = 2, Band 2 (Red) = 2. Combined digits = 22.

In standard four-band EIA color coding, the first two bands establish the base significant figures.

Determine the multiplier from the third band.

Band 3 (Orange) = multiplier of

10^3

(

1{}000

Orange corresponds to 3 zeros, or multiplying by

1{}000

Calculate nominal resistance and append the tolerance from the fourth band.

22 \times 1{}000 = 22{}000\ \Omega = 22\text{ k}\Omega

, with Band 4 (Gold) =

\pm 5\%

Combining the base value with the metric prefix gives

22\text{ k}\Omega

with a rated tolerance of

\pm 5\%

Anahtar Kavram

Four-Band Resistor Color Code Decoding

Tahmini Süre:35s

Soru 163Soru →

An avionics technician is servicing a step-down transformer in an aircraft subsystem. The transformer receives an input voltage of $115\text{ V AC}$ across its primary coil and delivers an output voltage of $23\text{ V AC}$ across its secondary coil. If the primary winding has $750\text{ turns}$ , what is the number of turns on the secondary winding?

Cevabı ve açıklamayı göster

Cevap: 150

Cevap

150 turns

The relationship between primary and secondary voltage and turns in a transformer is

\frac{V_p}{V_s} = \frac{N_p}{N_s}

. Given a primary voltage of

115\text{ V AC}

and a secondary voltage of

23\text{ V AC}

, the transformer has a step-down ratio of

5:1

(

115 / 23 = 5

). Dividing the primary turns (

750

) by

5

gives

150\text{ turns}

for the secondary winding.

Adım Adım Çözüm

State the fundamental transformer turns ratio formula relating voltage and winding turns.

\frac{V_p}{V_s} = \frac{N_p}{N_s}

The voltage induced across transformer windings is directly proportional to the number of turns on each winding.

Isolate the secondary turns variable (

N_s

N_s = N_p \times \frac{V_s}{V_p}

Algebraic rearrangement allows direct calculation of the secondary coil turns.

Substitute the given values (

V_p = 115\text{ V AC}

V_s = 23\text{ V AC}

N_p = 750\text{ turns}

) and simplify.

N_s = 750 \times \frac{23}{115} = 750 \times 0.2 = 150\text{ turns}

The voltage reduction factor is

5:1

, meaning the secondary winding must have one-fifth the number of turns of the primary winding.

Anahtar Kavram

Transformer turns and voltage ratio relationship

Tahmini Süre:1m 0s

Soru 164Soru →

Complete the statement explaining the operational principle of a ground-fault circuit interrupter (GFCI) protective device.

Aşağıdaki boşlukları doldurun

A ground-fault circuit interrupter (GFCI) detects hazardous leakage currents by comparing the current flowing through the hot conductor with the current returning through the conductor, tripping open if any imbalance indicates current escaping to .

Cevabı ve açıklamayı göster

Cevap

Blank 1: neutral; Blank 2: ground

A GFCI functions by using an internal differential current transformer through which both the energized (hot) and grounded return (neutral) conductors pass. When the circuit is normal, the magnetic fields generated by the equal and opposing currents cancel out. If current leaks to an external ground path (such as through damp ground, plumbing, or a human body), the magnetic fields no longer cancel, creating an induced voltage in the sensing coil that trips the breaker within a fraction of a second.

Adım Adım Çözüm

Identify the paired current-carrying conductors monitored by a GFCI in a single-phase AC circuit.

Under standard closed-circuit operation, normal electrical current supplied by the hot conductor must return completely through the neutral conductor.

Kirchhoff's Current Law dictates that the outgoing current in the energized wire must equal the returning current in the neutral line in an intact circuit.

Determine where leaked current flows during a ground-fault condition to cause a trip.

Any difference between hot and neutral currents signifies that current has diverted through an unintended path (such as a person or equipment chassis) into the ground.

The differential sensing coil in the GFCI detects the magnetic flux resulting from the current mismatch and trips the internal switch contacts to prevent electrical shock.

Anahtar Kavram

Differential Current Sensing in Ground-Fault Protective Devices

Tahmini Süre:1m 0s

Soru 165Soru →

Four-band resistors use standardized color bands to indicate numerical resistance values. Match each resistor color band with its correct numerical digit value.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Brown matches with digit value of

1

, Orange matches with digit value of

3

, Blue matches with digit value of

6

, and Gray matches with digit value of

8

According to the standard EIA resistor color code: Brown represents 1, Orange represents 3, Blue represents 6, and Gray represents 8.

Adım Adım Çözüm

Recall the standard electronic color code sequence from 0 through 9.

The standardized sequence is Black (0), Brown (1), Red (2), Orange (3), Yellow (4), Green (5), Blue (6), Violet (7), Gray (8), and White (9).

Each color band on a fixed resistor corresponds to an exact base-10 numerical value.

Pair each given color band to its corresponding numerical digit.

Brown = 1, Orange = 3, Blue = 6, and Gray = 8.

Direct mapping using the standard EIA color code chart.

Anahtar Kavram

Standard Resistor Color Code Digit Values

Tahmini Süre:35s

Soru 166Soru →

Thermal-magnetic circuit breakers utilize two distinct internal mechanisms to provide comprehensive circuit protection. Which internal component provides an instantaneous trip to protect against severe short-circuit conditions?

A bimetallic strip that flexes as it gradually heats up

An electromagnet that immediately pulls an armature to release the trip latch

A metal oxide varistor that clamps high voltage surges

A parallel shunt resistor that diverts short-circuit current to ground

Cevabı ve açıklamayı göster

Cevap: An electromagnet that immediately pulls an armature to release the trip latch

Cevap

An electromagnet that immediately pulls an armature to release the trip latch

Thermal-magnetic circuit breakers combine two tripping methods: thermal and magnetic. The magnetic component consists of an electromagnetic coil placed in series with the line. Under a severe fault such as a direct short circuit, the sudden surge in current generates an intense magnetic field that instantly draws an armature toward the coil, unlatching the switch mechanism within milliseconds to disconnect power safely.

Adım Adım Çözüm

Identify the dual-protection mechanisms used inside thermal-magnetic circuit breakers.

The breaker includes a thermal element (bimetallic strip) for prolonged, moderate overloads and a magnetic element (electromagnetic coil) for large, instantaneous fault currents.

Different types of overcurrent faults require different response times to protect wiring without causing nuisance tripping during normal startup surges.

Determine which mechanism is designed to trigger instantly during a dead short circuit.

A short circuit causes a massive and immediate spike in current, which energizes the electromagnetic coil strongly enough to instantly attract a movable armature and mechanically trip the contact mechanism.

Electromagnetic response does not depend on slow thermal accumulation, allowing contact separation within milliseconds.

Anahtar Kavram

Dual-trip operational principles of thermal-magnetic circuit breakers

Tahmini Süre:1m 0s

Soru 167Soru →

A four-band carbon resistor displays the color bands Orange, Orange, Brown, and Gold in sequence from left to right. What is the nominal resistance value of this component?

331\ \Omega

33\ \Omega

330\ \Omega

3.3\text{ k}\Omega

Cevabı ve açıklamayı göster

Cevap: $330\ \Omega$

Cevap

330\ \Omega

The first band (Orange) represents the digit 3, the second band (Orange) represents the digit 3, and the third band (Brown) represents a multiplier of

10^1

(10). Multiplying the significant digits by the multiplier yields

33 \times 10 = 330\ \Omega

Adım Adım Çözüm

Decode the first two significant color bands.

Orange corresponds to 3, and the second Orange corresponds to 3, giving the two-digit number 33.

In a 4-band resistor code, the first two bands represent the base significant digits.

Determine the multiplier from the third color band.

Brown corresponds to a multiplier of

10^1

(or

10

The third band indicates the power of ten by which the significant digits are multiplied.

Multiply the significant digits by the multiplier value.

33 \times 10 = 330\ \Omega

Combining the base digits and multiplier gives the nominal resistance rating.

Anahtar Kavram

Four-Band Resistor Color Code Decoding

Tahmini Süre:35s

Soru 168Soru →

Electronic circuits utilize specialized protective devices to safeguard equipment from overcurrent, sustained thermal overload, and transient overvoltage conditions. Match each protective component on the left with its primary operational characteristic on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Fast-Acting Fuse pairs with the description of a fine, low-mass conductor link that melts almost instantaneously to protect sensitive semiconductors; Time-Delay (Slow-Blow) Fuse pairs with the description of a dual-element design that tolerates brief startup inrush currents while clearing sustained overloads; Magnetic Circuit Breaker pairs with the description of a solenoid coil whose electromagnetic field trips a mechanical latch during short circuits; Metal Oxide Varistor (MOV) pairs with the description of a voltage-dependent resistor that clamps transient overvoltage spikes by shunting surge energy to ground.

Each match accurately pairs the protective component with its core physical operating principle: Fast-acting fuses provide rapid, sacrificial clearing for delicate components; time-delay fuses accommodate temporary motor start-up surges without nuisance blowing; magnetic circuit breakers leverage electromagnetic solenoids for instantaneous short-circuit interruption; and metal oxide varistors (MOVs) provide nonlinear resistance to clamp transient high-voltage spikes.

Adım Adım Çözüm

Analyze overcurrent versus overvoltage protection roles.

Identify that the Metal Oxide Varistor (MOV) is specifically an overvoltage surge suppression component, distinguishing it from the current-limiting fuses and circuit breaker.

MOVs clamp excess line voltage rather than breaking series current flow directly.

Distinguish between the response speeds and architectures of the two fuse types.

Match the fast-acting fuse to immediate clearing of low-energy circuits, and the time-delay fuse to circuits requiring high inrush current tolerance (such as inductive motor loads).

Time-delay fuses use dual elements or thermal delay mechanisms to prevent nuisance blowing during normal startup surges.

Examine the operating mechanism of the circuit breaker.

Connect the magnetic circuit breaker to the electromagnetic solenoid coil tripping mechanism.

Magnetic circuit breakers operate instantaneously based on electromagnetic attraction generated by fault currents rather than thermal expansion.

Anahtar Kavram

Operating Principles and Application Categories of Circuit Protective Devices

Tahmini Süre:1m 30s

Soru 169Soru →

An electrical technician connects an inductor and a resistor in series with a direct current ( $\text{DC}$ ) power source and a mechanical switch. Immediately after the switch is closed, which statement accurately describes the initial behavior of the inductor?

It acts as an immediate short circuit with zero initial resistance, allowing maximum current to surge instantly before blocking all current once energized.

It creates a counter-electromotive force (back-EMF) that opposes the sudden change in current, momentarily holding the circuit current at zero.

It completely blocks the electrical current indefinitely because inductive components cannot conduct direct current under any conditions.

It instantly steps up the source voltage to double its rated value across the resistor without drawing any initial energy from the power supply.

Cevabı ve açıklamayı göster

Cevap: It creates a counter-electromotive force (back-EMF) that opposes the sudden change in current, momentarily holding the circuit current at zero.

Cevap

The inductor creates a counter-electromotive force (back-EMF) that opposes the sudden change in current, momentarily holding the circuit current at zero.

Inductors store energy in a magnetic field and oppose any rapid change in electrical current. At the exact moment a DC switch closes, the rate of current change is at its maximum, producing an opposing counter-electromotive force (back-EMF) equal and opposite to the applied source voltage. Consequently, the initial current through the circuit is momentarily zero and rises exponentially over time.

Adım Adım Çözüm

Identify the fundamental property of self-inductance upon circuit connection.

An inductor inherently opposes any instantaneous change in the electrical current flowing through its coils (

V_L = L \frac{di}{dt}

According to Lenz's Law, when current attempts to rise from zero, the expanding magnetic flux induces an opposing voltage (counter-electromotive force or back-EMF).

Determine the initial electrical state at time

t = 0

(immediately upon switch closure).

The induced back-EMF across the inductor equals the full source voltage, meaning initial current

I(0) = 0\text{ A}

and initial resistor voltage drop

V_R = 0\text{ V}

Because current cannot change instantaneously through an inductor, it momentarily behaves like an open circuit before current gradually rises exponentially toward its Ohm's Law limit (

I = \frac{V}{R}

Anahtar Kavram

Inductor Transient DC Response and Back-EMF

Tahmini Süre:1m 0s

Soru 170Soru →

An electronic circuit uses a standard four-band resistor with the color bands Yellow, Violet, Brown, and Gold reading from left to right. What is the nominal resistance value of this resistor in ohms ( $\Omega$ )?

Cevabı ve açıklamayı göster

Cevap: 470

Cevap

The nominal resistance value is

470\ \Omega

In the standard electronic color code system, Yellow represents 4, Violet represents 7, Brown represents a multiplier of 10 (

10^1

), and Gold indicates a tolerance of

\pm 5\%

. Combining the digits gives 47, and multiplying by 10 produces

470\ \Omega

Adım Adım Çözüm

Decode the first two color bands into the first two digits

Yellow corresponds to 4 and Violet corresponds to 7, giving the base number 47

The first two bands on a four-band resistor represent the first and second significant figures of the resistance value

Decode the third band into the decimal multiplier

Brown corresponds to a multiplier of

10^1

(

10

)

The third band indicates the power of ten by which the base number must be multiplied

Calculate the total nominal resistance

47 \times 10 = 470\ \Omega

Multiplying the base digits by the multiplier gives the rated nominal resistance in ohms

Anahtar Kavram

Four-band resistor color code decoding

Tahmini Süre:30s

Soru 171Soru →

When servicing a $120\text{ V}$ alternating current (AC) power supply, a technician replaces a blown glass cartridge fuse with a replacement that has the correct $2\text{ A}$ current rating but a lower voltage rating of $32\text{ V}$ . Why is installing a fuse with this lower voltage rating a serious safety hazard?

The fuse will immediately melt and open under normal continuous load current.

The fuse may sustain an internal electric arc after the element melts, failing to clear the fault current.

The fuse will produce an excessive series voltage drop across its terminals, starving the load of operating voltage.

The fuse will automatically reset and re-energize the circuit before the short circuit is removed.

Cevabı ve açıklamayı göster

Cevap: The fuse may sustain an internal electric arc after the element melts, failing to clear the fault current.

Cevap

The fuse may sustain an internal electric arc after the element melts, failing to clear the fault current.

A fuse's voltage rating specifies its ability to safely suppress and extinguish the electrical arc formed when the internal wire link melts under overcurrent or short-circuit conditions. In a

120\text{ V}

circuit, a

32\text{ V}

rated fuse lacks sufficient dielectric gap and arc-quenching capability, allowing an arc to persist across the open terminals and continue conducting hazardous fault current.

Adım Adım Çözüm

Identify the primary electrical function of a fuse's voltage rating.

The voltage rating defines the maximum open-circuit voltage the fuse can safely interrupt without allowing sustained electrical arcing across the blown element gap.

When a fuse blows, the full source voltage appears directly across the open fuse gap.

Evaluate the risk of using a

32\text{ V}

rated fuse in a

120\text{ V}

circuit.

Because

120\text{ V}

exceeds the

32\text{ V}

breakdown threshold of the fuse housing and gap, the ionized air can maintain a conductive plasma arc.

Exceeding the voltage rating prevents arc extinction, leading to continuous current conduction, explosive case rupture, and fire hazard.

Anahtar Kavram

Fuse voltage ratings and arc-extinguishing capability

Tahmini Süre:1m 0s

Soru 172Soru →

Electronic circuits utilize specialized inductor and transformer configurations to control magnetic flux, suppress unwanted signals, and deliver tailored voltage levels. Match each component or winding configuration on the left with its primary operational feature on the right.

Soldaki öğeye tıklayın, sonra eşleşen sağdaki öğeye tıklayın

Cevabı ve açıklamayı göster

Cevap

Autotransformer matches the single continuous tapped winding without isolation; Ferrite bead inductor matches suppressing high-frequency interference; Center-tapped transformer matches providing two equal, opposite-phase output voltages; Toroidal core inductor matches confining magnetic flux within a closed ring geometry.

Each component is paired with its defining physical or electrical characteristic: autotransformers use a single continuous shared winding without electrical isolation, ferrite beads suppress and dissipate high-frequency electromagnetic noise, center-tapped transformers yield two symmetrical opposite-phase voltages relative to common, and toroidal inductors confine magnetic flux inside a closed circular core.

Adım Adım Çözüm

Identify the winding architecture of the autotransformer.

Recognize that unlike standard transformers with isolated primary and secondary coils, an autotransformer uses a single tapped winding.

This configuration provides voltage step-up or step-down functionality while sharing conductive turns.

Analyze the operational function of a ferrite bead inductor.

Identify it as a passive choke designed to attenuate high-frequency parasitic signals and EMI on leads.

Ferrite materials introduce high resistance and inductive reactance specifically at high RF frequencies.

Examine the output characteristics of a center-tapped secondary winding.

Determine that the center tap acts as a zero-reference, dividing the total output voltage into two balanced, opposite-phase potentials.

This is essential in full-wave rectifier designs and balanced audio stages.

Evaluate the geometric advantage of a toroidal core inductor.

Match it with the property of containing magnetic flux entirely within its ring structure.

The continuous ring-shaped magnetic circuit prevents stray electromagnetic field leakage.

Anahtar Kavram

Operating characteristics, winding designs, and core geometries of specialized inductors and transformers

Tahmini Süre:1m 0s

Soru 173Soru →

A step-down transformer installed in an industrial power supply has $1{}200\text{ turns}$ on its primary winding and $300\text{ turns}$ on its secondary winding. If the secondary coil delivers a current of $8\text{ A}$ to an operating load, what is the primary current ( $I_p$ ) drawn from the alternating current ( $\text{AC}$ ) source?

32\text{ A}

2\text{ A}

0.5\text{ A}

200\text{ mA}

Cevabı ve açıklamayı göster

Cevap: $2\text{ A}$

Cevap

The primary current drawn from the source is

2\text{ A}

In an ideal transformer, input power equals output power (

V_p \times I_p = V_s \times I_s

). Therefore, current is inversely proportional to the turns ratio:

\frac{I_p}{I_s} = \frac{N_s}{N_p}

. With a

4:1

step-down turns ratio (

1{}200\text{ turns}

300\text{ turns}

), the secondary current of

8\text{ A}

corresponds to a primary current of

8\text{ A} \div 4 = 2\text{ A}

Adım Adım Çözüm

Calculate the turns ratio of the transformer (

N_p / N_s

\text{Turns Ratio} = \frac{N_p}{N_s} = \frac{1{}200}{300} = 4

The turns ratio defines the proportional relationship between primary and secondary electrical parameters.

Apply the inverse current relationship for an ideal transformer (

I_p / I_s = N_s / N_p

I_p = I_s \times \left(\frac{N_s}{N_p}\right) = 8\text{ A} \times \left(\frac{300}{1{}200}\right) = 8\text{ A} \times \frac{1}{4} = 2\text{ A}

Because transformers conserve power (

P_{\text{in}} = P_{\text{out}}

), stepping down voltage by a factor of 4 causes current to step up by a factor of 4, meaning the primary current must be one-fourth of the secondary current.

Anahtar Kavram

Transformer Current and Turns Relationship

Tahmini Süre:1m 0s

Soru 174Soru →

Linear integrated circuits are designed to output a signal that varies continuously in direct proportion to input changes, whereas digital integrated circuits process information exclusively through discrete binary voltage states.

Doğru

Yanlış

Cevabı ve açıklamayı göster

Cevap: True

Cevap

True

The statement accurately distinguishes linear integrated circuits from digital integrated circuits. Linear ICs process continuous analog signals where the output is directly proportional to the input, whereas digital ICs function strictly using discrete binary voltage levels (logic 0 and logic 1).

Adım Adım Çözüm

Identify the defining operational characteristic of linear integrated circuits.

Linear (analog) ICs produce continuous, smooth output signals proportional to fluctuating input voltages.

Linear ICs function as amplifiers, filters, and voltage regulators that handle analog waveforms without converting them into discrete numerical steps.

Identify the defining operational characteristic of digital integrated circuits.

Digital ICs operate using binary states (typically HIGH and LOW voltages corresponding to binary 1 and 0).

Digital ICs comprise logic gates, flip-flops, and processors designed specifically for binary computation and discrete state switching.

Evaluate the accuracy of the comparison in the statement.

The statement correctly contrasts continuous analog modulation in linear ICs with discrete binary switching in digital ICs.

Both definitions accurately reflect the standard classification of integrated circuits in electronics.

Anahtar Kavram

Classification of Integrated Circuits: Linear (Analog) vs. Digital

Tahmini Süre:1m 0s

Soru 175Soru →

A technician tests a four-band carbon resistor marked with the color sequence Green, Blue, Red, and Gold from left to right. What is the rated resistance and tolerance of this resistor?

562\ \Omega \pm 5\%

5.6\text{ k}\Omega \pm 10\%

5.6\text{ k}\Omega \pm 5\%

560\ \Omega \pm 5\%

Cevabı ve açıklamayı göster

Cevap: $5.6\text{ k}\Omega \pm 5\%$

Cevap

5.6\text{ k}\Omega \pm 5\%

(

5,600\ \Omega \pm 5\%

)

According to the standard EIA four-band color code, Green represents the digit 5, Blue represents the digit 6, Red indicates a multiplier of

10^2

(

100

), and Gold represents a tolerance of

\pm 5\%

. Combining these values yields

56 \times 100 = 5,600\ \Omega

(

5.6\text{ k}\Omega

) with a tolerance of

\pm 5\%

Adım Adım Çözüm

Determine the first and second significant digits from the first two color bands.

Green corresponds to 5 and Blue corresponds to 6, giving the significant digits 56.

In standard four-band EIA color coding, the first two bands represent the first two significant figures.

Determine the multiplier from the third color band and calculate nominal resistance.

Red indicates a multiplier of

10^2

(

100

). Multiplying

56 \times 100 = 5,600\ \Omega = 5.6\text{ k}\Omega

The third band determines the power of ten by which the significant digits are multiplied.

Determine the tolerance percentage from the fourth color band.

Gold indicates a tolerance of

\pm 5\%

The fourth band specifies the manufacturing tolerance rating of the component.

Anahtar Kavram

Four-band resistor color code decoding

Tahmini Süre:35s

Soru 176Soru →

While integrated circuits offer significant advantages in miniaturization, weight, and reliability over discrete component circuits, what is one of their primary operational limitations?

They cannot combine different semiconductor elements such as diodes and transistors within the same package.

They have limited power dissipation capabilities and cannot directly handle high currents or voltages.

They require alternating current supply voltages rather than direct current to bias their internal junctions.

They rely exclusively on insulating materials rather than conductive semiconductor paths to route internal signals.

Cevabı ve açıklamayı göster

Cevap: They have limited power dissipation capabilities and cannot directly handle high currents or voltages.

Cevap

They have limited power dissipation capabilities and cannot directly handle high currents or voltages.

Integrated circuits pack thousands or millions of microscopic components into an extremely small physical footprint. Because thermal dissipation is proportional to surface area and component mass, standard integrated circuits cannot directly manage heavy currents or high voltage levels without overheating, requiring external discrete power devices for high-power tasks.

Adım Adım Çözüm

Analyze the physical construction and packaging constraints of integrated circuits.

Integrated circuits contain microscopic components packed into a tiny physical volume, resulting in a very low thermal mass and limited surface area.

Physical volume and surface area dictate how effectively heat generated by electrical current can be transferred away from internal junctions.

Compare the power handling capabilities of integrated circuits with discrete power components.

High currents and high voltages generate substantial heat (

P = I^2 R

and

P = V \times I

), which can quickly destroy delicate internal semiconductor structures unless external discrete power transistors are used.

Identifying the primary operational limitation of integrated circuits compared to discrete component designs.

Anahtar Kavram

Operational limitations and power dissipation constraints of integrated circuits

Tahmini Süre:1m 0s

Soru 177Soru →

When replacing or handling Complementary Metal-Oxide-Semiconductor (CMOS) integrated circuits on a circuit board, why is it critical for a technician to wear an antistatic wrist strap connected to ground?

To bridge circuit board traces and allow insulating materials to conduct high current

To safely dissipate static electricity from the body before it can puncture microscopic gate oxide layers

To switch internal bipolar transistor configurations from NPN mode to PNP mode during operation

To convert stray alternating current (AC) power line interference into direct current (DC)

Cevabı ve açıklamayı göster

Cevap: To safely dissipate static electricity from the body before it can puncture microscopic gate oxide layers

Cevap

To safely dissipate static electricity from the body before it can puncture microscopic gate oxide layers

CMOS integrated circuits contain field-effect transistors featuring microscopic silicon dioxide gate insulation layers. Because the human body can carry several thousand volts of static electricity unnoticed, touching an unprotected integrated circuit can cause electrostatic discharge (ESD) that punctures this insulation, causing irreversible chip failure. A grounded antistatic wrist strap safely discharges static electricity before it reaches sensitive components.

Adım Adım Çözüm

Identify the internal construction of CMOS integrated circuits

CMOS devices use field-effect transistors that rely on extremely thin silicon dioxide insulating layers at their gates

Understanding the physical structure explains the component's vulnerability to high-voltage spikes

Determine the effect of electrostatic discharge (ESD) and the role of grounding

Static electricity accumulated on the human body can reach thousands of volts, which easily arcs across and destroys microscopic oxide insulation

A grounded antistatic wrist strap continuously bleeds electrostatic charges safely to ground before they can discharge into the IC

Anahtar Kavram

Electrostatic discharge (ESD) protection for CMOS integrated circuits

Tahmini Süre:1m 0s

Soru 178Soru →

To maintain a steady output voltage in a voltage regulator circuit, a Zener diode must be connected in a forward-bias orientation.

Doğru

Yanlış

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False

The statement is false because Zener diodes must be reverse-biased to exploit their precise breakdown voltage characteristic for stabilizing and regulating DC voltages.

Adım Adım Çözüm

Identify the primary operating mode utilized by a Zener diode for voltage regulation.

Zener diodes are engineered to operate in their reverse breakdown region (the Zener region).

When reverse voltage reaches the breakdown threshold (

V_Z

), voltage across the diode remains virtually constant despite significant changes in reverse current.

Evaluate the electrical behavior of a Zener diode when placed in forward bias.

In forward bias, the Zener diode conducts like a standard silicon diode with a typical forward voltage drop of approximately

0.7\text{ V}

Forward biasing does not activate the controlled avalanche or Zener breakdown mechanism necessary for regulating higher voltages.

Evaluate the truth value of the given statement.

The statement asserts that forward bias is required for voltage regulation, which is incorrect.

Reverse biasing is required for a Zener diode to act as a voltage regulator.

Anahtar Kavram

Zener Diode Reverse-Bias Voltage Regulation

Tahmini Süre:45s

Soru 179Soru →

Hybrid integrated circuits are constructed by diffusing all active semiconductor devices and passive elements directly into a single continuous silicon substrate.

Doğru

Yanlış

Cevabı ve açıklamayı göster

Cevap: False

Cevap

False

The statement is false because fabricating all active transistors, diodes, and passive resistors directly onto a single continuous semiconductor crystal is the definition of a monolithic integrated circuit. In contrast, hybrid integrated circuits are constructed by attaching multiple individual semiconductor chips, along with thick- or thin-film passive components, onto an insulating ceramic substrate.

Adım Adım Çözüm

Identify the fabrication method described in the statement.

The statement describes diffusing all active and passive components into a single continuous semiconductor substrate.

Determining the specific physical construction technique is essential to classify the integrated circuit type.

Compare the description to the definitions of monolithic and hybrid integrated circuits.

Single-substrate diffusion defines a monolithic IC, whereas hybrid ICs combine separate semiconductor dies and discrete components on a ceramic or insulating carrier.

Differentiating single-crystal monolithic manufacturing from multi-element hybrid assembly confirms the statement's accuracy.

Determine the truth value of the statement.

The statement incorrectly attributes monolithic construction characteristics to hybrid integrated circuits.

Because the definition provided does not match hybrid IC construction, the statement is false.

Anahtar Kavram

Classification of Integrated Circuit Construction: Monolithic vs. Hybrid

Tahmini Süre:1m 0s

Soru 180Soru →

An electronics technician uses an ohmmeter to test an unmarked semiconductor diode. When the positive lead is placed on Terminal 1 and the negative lead on Terminal 2, the meter indicates a low resistance. When the meter leads are reversed, the meter indicates infinite resistance (an open circuit). Based on these test results, which of the following conclusions is correct?

Terminal 1 is the anode, Terminal 2 is the cathode, and the diode is operational.

Terminal 1 is the cathode, Terminal 2 is the anode, and the diode is operational.

The diode is defective with an internal short circuit because it conducts current during testing.

The diode is defective because a healthy component must maintain equal bidirectional current flow.

Cevabı ve açıklamayı göster

Cevap: Terminal 1 is the anode, Terminal 2 is the cathode, and the diode is operational.

Cevap

Terminal 1 is the anode, Terminal 2 is the cathode, and the diode is operational.

A properly functioning semiconductor diode conducts current when forward-biased (positive potential on the anode, negative potential on the cathode) and blocks current when reverse-biased (positive potential on the cathode, negative potential on the anode). Because the ohmmeter indicates low resistance when the positive lead connects to Terminal 1 and the negative lead connects to Terminal 2, Terminal 1 is the anode and Terminal 2 is the cathode. The infinite resistance displayed upon reversing the leads verifies that the PN junction is intact and the diode is operational.

Adım Adım Çözüm

Analyze the first meter reading for biasing conditions

Low resistance occurs when the positive lead is on Terminal 1 and the negative lead is on Terminal 2, which corresponds to forward bias.

A semiconductor diode only allows significant current to flow when its anode is made positive relative to its cathode.

Analyze the second meter reading for reverse-bias integrity

Infinite resistance when the leads are reversed corresponds to reverse bias.

A functioning PN junction establishes a depletion region that blocks current when the cathode is positive relative to the anode.

Identify terminal polarities and verify component health

Terminal 1 is the anode, Terminal 2 is the cathode, and the high front-to-back resistance ratio confirms normal diode operation.

A healthy diode exhibits low forward resistance and very high/infinite reverse resistance.

Anahtar Kavram

Diode terminal identification and continuity verification using front-to-back resistance measurements

Tahmini Süre:1m 0s

ÖncekiSayfa 9 / 11Sonraki

Electronic Components

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Cevap

Adım Adım Çözüm

Anahtar Kavram