Examkin

Soru

Zorluk: OrtaPhysical Interface and Cabling Types

Match each physical network cabling or interface standard on the left with its corresponding physical characteristic or specification on the right.

  • Single-Mode Fiber (SMF) OS2Uses a 9 µm core diameter designed for long-haul transmission without modal dispersion.
  • Multimode Fiber (MMF) OM3Uses a 50 µm laser-optimized core diameter supporting 10 Gbps up to 300 meters.
  • Category 6 UTP (10GBASE-T)Supports 10 Gbps Ethernet over unshielded copper up to a maximum distance of 55 meters.
  • Rollover CableReverses pin connections on opposite ends to connect a computer serial port to a switch console port.

Cevap

Single-Mode Fiber (SMF) OS2 matches the 9 µm core diameter specification for long-haul links; Multimode Fiber (MMF) OM3 matches the 50 µm core supporting 10 Gbps up to 300 m; Category 6 UTP (10GBASE-T) matches 10 Gbps support up to 55 m; Rollover Cable matches reversing pin connections for console access.
Each physical media type has distinct physical properties: Single-Mode Fiber (OS2) uses a 9 µm core to eliminate modal dispersion over long distances; Multimode Fiber (OM3) uses a laser-optimized 50 µm core to achieve 10 Gbps over 300 m; Category 6 UTP supports 10 Gbps up to 55 m; and Rollover Cable completely flips the pin connections (pin 1 to pin 8) for out-of-band console access.

Adım Adım Çözüm

1
Analyze Single-Mode Fiber (SMF) OS2 characteristics.
Identify that SMF features a small 9 µm core for long-range links with zero modal dispersion.
SMF core size allows only one mode of light propagation, enabling distances of 10 km or more.
2
Analyze Multimode Fiber (MMF) OM3 characteristics.
Identify that OM3 fiber uses a laser-optimized 50 µm core rated for 10 Gbps up to 300 meters.
OM3 fiber is engineered for 850 nm VCSEL lasers to extend 10G reach beyond older OM1/OM2 fibers.
3
Evaluate Category 6 UTP copper constraints for 10GBASE-T.
Match Category 6 UTP to 10 Gbps transmission capped at 55 meters.
Category 6 UTP can support 10 Gbps up to 55 meters, whereas Category 6A extends this reach to 100 meters.
4
Identify the purpose and pinout structure of a Rollover Cable.
Match Rollover Cable to reversing pin connections for switch console management.
Rollover cables flip all 8 pins (pin 1 to 8, 2 to 7) to map DB-9/USB serial adapters to RJ-45 Cisco console ports.

Anahtar Kavram

Physical interface cabling specifications, core diameters, distance limits, and pinout roles in Cisco enterprise networks.
Bu soruyu puanla

Konular

Physical Interface and Cabling Types

Bu konudan daha fazla soru