A network administrator is tasked with configuring a new WPA2-Personal (PSK) wireless network for client connectivity using the Cisco Wireless LAN Controller (WLC) web GUI. Place the steps in the correct order to complete the WLAN deployment from initial creation to saving the final configuration.
- 1Navigate to the WLANs menu, select Create New from the drop-down list, and click Go.
- 2Enter the Profile Name and SSID, assign a WLAN ID, and click Apply.
- 3On the General tab, select the target Interface/Interface Group for client traffic and select the Enabled check box for Status.
- 4Navigate to Security > Layer 2, select WPA+WPA2, check WPA2 Policy, and choose PSK under Auth Key Management.
- 5Type the pre-shared key into the PSK field, click Apply to confirm changes, and click Save Configuration at the top right.
Cevap
The correct procedural order is: 1) Navigate to WLANs and select Create New, 2) Define Profile Name, SSID, and WLAN ID, 3) Select the Interface/Interface Group and enable Status on the General tab, 4) Configure WPA2-PSK parameters under Security > Layer 2, 5) Enter the PSK passphrase, click Apply, and click Save Configuration.
Configuring a client-facing WLAN on a Cisco AireOS WLC follows a strict sequential process: First, initiate creation under the WLANs menu using Create New. Second, define basic network parameters (Profile Name, SSID, ID) and click Apply to launch the edit view. Third, select the client traffic Interface and check Enabled on the General tab. Fourth, navigate to Security > Layer 2 to specify WPA2 Policy and PSK authentication. Finally, enter the pre-shared key passphrase, click Apply to update running memory, and save the WLC configuration.
Adım Adım Çözüm
Anahtar Kavram
WLC GUI WLAN Creation and Client Connectivity Workflow
Tahmini Süre:1m 30s