A network administrator is configuring interface GigabitEthernet0/1 on a Cisco Catalyst switch to connect a single end-user computer. The interface needs to be explicitly configured as an access port and assigned to VLAN 10. Which two Cisco IOS commands must be entered in interface configuration mode to complete this task?
- switchport mode accessCevap
- Bswitchport trunk native vlan 10
- switchport access vlan 10Cevap
- Dswitchport mode dynamic desirable
Cevap
The correct commands are 'switchport mode access' to define the operational mode as an access port, and 'switchport access vlan 10' to assign the access port to VLAN 10.
To properly configure an access port on a Cisco Catalyst switch, the administrator must define the port operational mode using 'switchport mode access' and specify its VLAN association using 'switchport access vlan 10'.
Adım Adım Çözüm
Anahtar Kavram
Cisco IOS VLAN Access Port Configuration
Tahmini Süre:45s