Examkin

Soru

Zorluk: OrtaCisco Wireless Architectures and AP Modes

Match each Cisco Lightweight Access Point (AP) operational mode to its correct functional behavior and network traffic handling characteristic.

  • Local ModeEnforces central switching by encapsulating all wireless client data and management traffic into CAPWAP tunnels bound for the WLC.
  • FlexConnect ModeSupports local switching of client traffic onto the local switch VLANs, maintaining connectivity during WLC WAN link outages.
  • Rogue Detector ModeDisables wireless radios and uses its wired Ethernet interface to correlate MAC addresses seen over the air with ARP/MAC tables on the wired network.
  • SE-Connect ModeDedicating radios exclusively to collecting raw RF spectrum data and streaming it to external diagnostic software like Cisco Spectrum Expert.

Cevap

Local Mode maps to central CAPWAP data encapsulation; FlexConnect Mode maps to local switching and branch WAN outage resilience; Rogue Detector Mode maps to wired network MAC tracking with disabled radios; SE-Connect Mode maps to dedicated RF spectrum analysis using external tools.
Each AP mode serves a distinct operational purpose in Cisco wireless networks. Local Mode performs central switching via CAPWAP. FlexConnect Mode provides local traffic switching and WAN fault tolerance for branch environments. Rogue Detector Mode disables wireless radios and monitors wired switch tables to detect rogue devices physically connected to the network. SE-Connect Mode dedicates AP radios to collecting RF spectrum data for external analysis software.

Adım Adım Çözüm

1
Evaluate Local Mode traffic handling
Local Mode uses CAPWAP data and control tunnels for all traffic back to the centralized WLC.
This is the default behavior in centralized Cisco wireless architectures.
2
Evaluate FlexConnect Mode traffic handling and resilience
FlexConnect allows local traffic switching at the branch switch port, supporting standalone operation when WLC WAN connectivity drops.
Designed specifically for remote branch offices to avoid routing local traffic across the WAN.
3
Evaluate Rogue Detector Mode functionality
Rogue Detector mode disables radios and monitors wired LAN broadcasts to match MAC addresses of rogue devices.
Focuses strictly on verifying if rogue wireless devices are connected to the physical wired infrastructure.
4
Evaluate SE-Connect Mode functionality
SE-Connect streams raw RF data to external spectrum analysis applications.
Used for dedicated spectrum troubleshooting rather than serving clients or sniffing 802.11 frames.

Anahtar Kavram

Cisco Lightweight AP Operational Modes and Traffic Encapsulation Mechanics
Bu soruyu puanla

Konular

Cisco Wireless Architectures and AP Modes

Bu konudan daha fazla soru