A network administrator needs to create a new Wireless LAN (WLAN) on a Cisco Wireless LAN Controller (WLC) using the GUI to allow client connectivity. Arrange the steps required to configure and activate the new WLAN in the correct sequential order.
- 1Navigate to the WLANs tab, select 'Create New' from the drop-down menu, and click Go.
- 2Define the Profile Name, SSID, and select the target Interface/Interface Group under the General tab.
- 3Select the Layer 2 security mechanism (such as WPA2/WPA3 Personal or Enterprise) under the Security tab.
- 4Select the Status checkbox under the General tab and click Apply to enable the WLAN.
Cevap
The correct order to create and activate a WLAN via the Cisco WLC GUI is: 1) Navigate to the WLANs tab and select 'Create New', 2) Define the Profile Name, SSID, and mapped Interface under the General tab, 3) Select Layer 2 security settings under the Security tab, and 4) Select the Status checkbox under the General tab and click Apply to enable client connections.
When configuring a WLAN via the Cisco WLC GUI, the administrator must first create the new WLAN entry from the WLANs menu. Next, the Profile Name, SSID, and Interface mapping are set under the General tab. After that, authentication methods (such as PSK or 802.1X) are selected under the Security tab. Finally, the Status checkbox under the General tab is enabled and applied to begin broadcasting the network to client devices.
Adım Adım Çözüm
Anahtar Kavram
WLC GUI WLAN Configuration Sequence
Tahmini Süre:1m 0s