A network administrator needs to configure a new WPA2-Enterprise Wireless LAN (WLAN) for client connectivity using the Cisco Wireless LAN Controller (WLC) GUI. Arrange the steps in the correct chronological order required to successfully create, configure security settings for, enable, and apply this WLAN.
- 1Navigate to WLANs > WLANs, select Create New from the drop-down list, and click Go.
- 2Enter the Profile Name, SSID, and WLAN ID, then click Apply to open the WLANs > Edit configuration view.
- 3Under the General tab, map the WLAN to the designated dynamic interface and select the Status check box to enable the WLAN.
- 4Under the Security > Layer 2 tab, enable WPA2 Policy and set the Auth Key Management setting to 802.1X.
- 5Under the AAA Servers tab, select the active RADIUS server under Authentication Servers and click Apply to finalize the configuration.
Cevap
The correct procedural order is: 1) Navigate to WLANs > WLANs and select Create New, 2) Define Profile Name, SSID, and WLAN ID then click Apply, 3) Select the dynamic interface and enable Status under the General tab, 4) Configure WPA2 Policy with 802.1X under the Security > Layer 2 tab, and 5) Select the RADIUS authentication server under the AAA Servers tab and click Apply.
Creating a WLAN via the Cisco WLC web GUI follows a strict sequential process. First, navigating to WLANs > WLANs and executing 'Create New' allows entry of the basic identifying information (Profile Name, SSID, and WLAN ID). Clicking Apply creates the WLAN instance and presents the edit menu. On the General tab, the administrator maps the WLAN to a dynamic interface for VLAN access and enables the WLAN status. Next, under Security > Layer 2, WPA2 Policy and 802.1X Key Management are specified. Finally, under the AAA Servers tab, the specific RADIUS server is attached to handle 802.1X authentication, and clicking Apply saves the full configuration.
Adım Adım Çözüm
Anahtar Kavram
WLC GUI WLAN Creation and 802.1X Security Configuration Order
Tahmini Süre:2m 0s