Examkin

Soru

Zorluk: Çok zorWireless Security Protocols (WPA, WPA2, WPA3)

An enterprise organization is updating its Cisco Wireless Controller infrastructure to enforce WPA3-Enterprise 192-bit security mode across critical WLANs. During client validation, legacy 802.1X supplicants configured with AES-CCMP-128 encryption and EAP-TLS fail to associate with the SSID, whereas modern clients configured for 192-bit security connect successfully. Which technical requirement of WPA3-Enterprise 192-bit mode causes these legacy WPA2-Enterprise clients to fail association?

  1. WPA3-Enterprise 192-bit mode mandates GCMP-256 encryption and required Protected Management Frames (PMF), making CCMP-128 client suites incompatible.Cevap
  2. B
    WPA3-Enterprise 192-bit mode requires TACACS+ authentication servers to encrypt EAP payloads, which disables RADIUS EAP-TLS negotiation.
  3. C
    FlexConnect mode Access Points automatically drop WPA3-Enterprise 802.1X authentication frames if central switching is disabled on the controller.
  4. D
    Enabling Spanning Tree PortFast on the switch port attached to the Access Point suppresses 802.1X EAPOL traffic during WPA3 key exchange.

Cevap

WPA3-Enterprise 192-bit mode mandates GCMP-256 encryption and required Protected Management Frames (PMF), making CCMP-128 client suites incompatible.
WPA3-Enterprise 192-bit mode enforces a strict suite of cryptographic algorithms defined in CNSA (Commercial National Security Algorithm) guidelines. This requires Galois/Counter Mode Protocol with a 256-bit key (GCMP-256), HMAC-SHA384 key derivation, and mandatory Protected Management Frames (PMF) using BIP-GMAC-256. Clients offering legacy AES-CCMP-128 cannot satisfy these stringent RSN security capabilities and are rejected during association.

Adım Adım Çözüm

1
Analyze WPA3-Enterprise 192-bit security requirements.
Identified that WPA3-Enterprise 192-bit mode requires specific robust cryptographic primitives: GCMP-256 for data confidentiality, HMAC-SHA384 for key derivation, and mandatory Protected Management Frames (PMF / IEEE 802.11w) with BIP-GMAC-256.
Security mandates for high-security deployment profiles require replacing 128-bit ciphers with 256-bit ciphers.
2
Compare legacy client configuration against WPA3-Enterprise 192-bit parameters.
Legacy clients attempting to associate with AES-CCMP-128 do not meet the minimum cipher requirements (GCMP-256) enforced by the WPA3-Enterprise 192-bit WLAN profile.
WLCs operating in 192-bit mode reject Robust Security Network (RSN) Capabilities IE proposals that offer lower-tier 128-bit ciphers.
3
Formulate the exact failure root cause.
The failure occurs due to mismatched cipher suites (CCMP-128 vs GCMP-256) and mandatory PMF requirements.
Both GCMP-256 and PMF enforcement are mandatory under 192-bit mode specification.

Anahtar Kavram

WPA3-Enterprise 192-bit Cryptographic Requirements and PMF Enforcement
Bu soruyu puanla

Konular

Wireless Security Protocols (WPA, WPA2, WPA3)

Bu konudan daha fazla soru