Examkin

Soru

Zorluk: OrtaWireless LAN Client Connectivity Configuration via WLC GUI

A network administrator needs to prevent wireless clients connected to the same SSID from communicating directly with each other at Layer 2 across the wireless controller. Which menu tab and feature configuration on the Cisco Wireless LAN Controller (WLC) GUI must be configured to achieve this client isolation?

  1. Navigate to the Advanced tab under WLANs edit settings and set the Peer-to-Peer Blocking Action.Cevap
  2. B
    Navigate to the Security tab > Layer 3 sub-tab and enable Web Policy with Client Isolation.
  3. C
    Navigate to the General tab under WLANs edit settings and select Peer-to-Peer Isolation from the Radio Policy drop-down list.
  4. D
    Navigate to the QoS tab under WLANs edit settings and configure Traffic Stream Metrics (TSM) for Client Separation.

Cevap

Navigate to the Advanced tab under WLANs edit settings and set the Peer-to-Peer Blocking Action.
Peer-to-Peer Blocking is configured under the Advanced tab of a WLAN's configuration in the Cisco WLC GUI. It restricts connected wireless clients on the same WLAN from transmitting traffic directly to each other, enhancing network security.

Adım Adım Çözüm

1
Identify the required client isolation requirement.
The requirement is to prevent Layer 2 communications between clients associated with the same WLAN.
Peer-to-peer blocking stops wireless stations on the same subnet/WLAN from attacking or communicating directly with each other.
2
Locate the correct configuration menu in the Cisco WLC GUI.
Access WLANs > WLANs ID > Edit, then select the Advanced tab.
Advanced WLAN operational settings including Peer-to-Peer Blocking, AAA Override, and Coverage Hole Detection are grouped under the Advanced tab.
3
Select the appropriate Peer-to-Peer Blocking Action.
Choose Drop (or Up-Stream Forward depending on gateway design).
Setting the action to Drop drops peer-to-peer frames directly at the controller.

Anahtar Kavram

Cisco WLC Peer-to-Peer (P2P) Blocking configuration under WLAN Advanced tab
Tahmini Süre:1m 30s
Bu soruyu puanla

Konular

Wireless LAN Client Connectivity Configuration via WLC GUI

Bu konudan daha fazla soru