Examkin

Soru

Zorluk: Çok zorL2 Switching Concepts and MAC Table Operation

A Cisco Catalyst switch operating with default MAC address table aging timer settings (300 seconds) has an existing dynamic entry for Host A (MAC: 0010.a412.1111) on interface GigabitEthernet0/1 with a current age of 295 seconds. At time t=0t = 0 seconds, Host B (MAC: 0010.a412.2222) connected to GigabitEthernet0/2 sends a unicast frame destined to Host A. Host A sends no traffic during this period. At time t=10t = 10 seconds, Host B sends a second unicast frame destined to Host A. How does the switch process the frame sent at t=10t = 10 seconds?

  1. The switch floods the frame out all operational ports within the VLAN except GigabitEthernet0/2 because Host A's entry aged out 5 seconds prior.Cevap
  2. B
    The switch forwards the frame directly out GigabitEthernet0/1 because the frame sent at t = 0 seconds refreshed Host A's MAC address table aging timer.
  3. C
    The switch drops the frame at t = 10 seconds because the destination MAC address is absent from the MAC table and ARP resolution is incomplete.
  4. D
    The switch forwards the frame out GigabitEthernet0/1 and transmits a LLDP/CDP topology query to verify Host A's connectivity.

Cevap

The switch floods the frame out all operational ports within the VLAN except GigabitEthernet0/2 because Host A's entry aged out 5 seconds prior.
Switches update and refresh MAC address table entries strictly based on the Source MAC address of ingress frames. When Host B sends a frame destined for Host A at t = 0 seconds, Host A's entry timer is NOT reset because Host A did not transmit any frame. Consequently, Host A's dynamic entry reaches the 300-second threshold at t = 5 seconds and is removed from the MAC table. When Host B sends another frame at t = 10 seconds, the switch finds no matching destination entry and floods the unknown unicast frame out all active ports in the VLAN except the receiving port (GigabitEthernet0/2).

Adım Adım Çözüm

1
Analyze MAC address table aging mechanics for the frame transmitted at t = 0 seconds.
Host B (0010.a412.2222) is learned on GigabitEthernet0/2. The frame is forwarded out GigabitEthernet0/1 using Host A's existing MAC table entry.
MAC address aging timers are refreshed ONLY when a frame is received containing that MAC address as the Source MAC. Destined (destination MAC) lookups do not reset the aging timer.
2
Calculate the expiration time of Host A's MAC address entry.
Host A's entry had an age of 295 seconds at t = 0. With a 300-second default timer and no incoming frames originating from Host A, the entry expires at t = 5 seconds (295 + 5 = 300 seconds).
Host A remained silent, so no frames with Source MAC 0010.a412.1111 entered the switch to reset the timer.
3
Evaluate the switch forwarding logic for the frame sent at t = 10 seconds.
At t = 10 seconds, the destination MAC 0010.a412.1111 is no longer in the MAC address table. The switch performs unknown unicast flooding.
When a destination unicast MAC address is not present in the L2 MAC table, Layer 2 switches flood the frame out all active interfaces in the same VLAN except the ingress port.

Anahtar Kavram

L2 MAC Table Aging and Unknown Unicast Flooding Logic
Bu soruyu puanla

Konular

L2 Switching Concepts and MAC Table Operation

Bu konudan daha fazla soru