Examkin

Soru

Zorluk: OrtaPhysical Interface and Cabling Types

A network administrator is evaluating physical cabling and optical transceiver specifications for a new campus network deployment. Which two statements accurately describe Ethernet physical interface and cabling requirements? (Select TWO.)

  1. 10GBASE-SR transceivers utilize multimode fiber (MMF) with LC connectors for short-distance transmission up to several hundred meters.Cevap
  2. 1000BASE-T operation requires all four wire pairs of Category 5e or higher unshielded twisted-pair (UTP) cabling.Cevap
  3. C
    1000BASE-SX optical transceivers use single-mode fiber (SMF) to achieve link distances of up to 10 kilometers.
  4. D
    Connecting two like devices, such as switch-to-switch FastEthernet interfaces with Auto-MDIX disabled, requires a standard straight-through cable.
  5. E
    Category 6a UTP cabling restricts 10GBASE-T copper Ethernet links to a maximum distance of 37 meters.

Cevap

The correct statements are that 10GBASE-SR transceivers utilize multimode fiber (MMF) with LC connectors for short distances, and 1000BASE-T requires all four pairs of UTP cabling.
10GBASE-SR is designed for short-reach multimode fiber up to 300 meters using LC connectors. Additionally, 1000BASE-T standard mandates the use of all four pairs (8 wires) in Cat5e or higher twisted-pair cabling to transmit 1 Gbps data rates.

Adım Adım Çözüm

1
Analyze optical transceiver standards and media compatibility
10GBASE-SR specifies Short Range operation over 850 nm multimode fiber using LC connectors, making the 10GBASE-SR MMF statement correct. 1000BASE-SX also uses MMF (not SMF), making the 1000BASE-SX SMF statement incorrect.
Optical optics are differentiated by wavelength, distance capability (SR vs LR/LX), and fiber modal type (MMF vs SMF).
2
Analyze copper twisted-pair cabling specifications and pinouts
1000BASE-T requires all four pairs of Category 5e/6 UTP for full Gigabit transmission. Category 6a supports 10GBASE-T up to 100 meters (not restricted to 37 meters).
Gigabit Ethernet utilizes five-level pulse amplitude modulation (PAM-5) across all four pairs simultaneously.
3
Verify MDI/MDI-X cable requirements
Connecting identical layer devices (switch to switch) when Auto-MDIX is turned off requires crossover wiring so transmit pins connect to receive pins.
Straight-through cables connect MDI to MDI-X devices (e.g., switch to host); like-to-like connections require crossover pinouts.

Anahtar Kavram

Physical Ethernet standards specify distinct transceiver optics, fiber types, cable categories, and pinout pairings based on bandwidth and distance requirements.
Bu soruyu puanla

Konular

Physical Interface and Cabling Types

Bu konudan daha fazla soru