Match each Cisco Lightweight Access Point (AP) operational mode on the left with its corresponding functional behavior and traffic forwarding characteristics on the right.
- Local ModeDefault operating mode where all control and client data traffic are encapsulated in CAPWAP tunnels and forwarded to a centralized controller.
- FlexConnect ModeAllows local client traffic switching at the AP level and supports local authentication fallback when WAN connectivity to the controller fails.
- Monitor ModeDisables client-serving capabilities to continuously cycle through assigned channels, gathering data for WIDS, rogue AP detection, and location services.
- Rogue Detector ModeDisables wireless radios to monitor wired subnet ARP/MAC address tables, correlating them with rogue MAC addresses reported by other APs.
- Sniffer ModeDisables client-serving capabilities to capture raw 802.11 wireless frames on specified channels and stream them inside CAPWAP tunnels to a network analyzer.
Cevap
Local Mode pairs with central CAPWAP tunnel encapsulation; FlexConnect Mode pairs with local switching and WAN failover fallback; Monitor Mode pairs with continuous channel scanning for WIDS/rogue detection; Rogue Detector Mode pairs with wired ARP/MAC table monitoring; Sniffer Mode pairs with capturing and forwarding raw 802.11 frames to a packet analyzer.
Each AP mode matches its precise Cisco implementation standards: Local mode centralizes traffic over CAPWAP tunnels; FlexConnect mode allows local switching and standalone branch operation; Monitor mode scans wireless channels without serving clients; Rogue Detector correlates wired ARP/MAC tables with reported rogue lists; Sniffer mode captures raw 802.11 frames for analysis.
Adım Adım Çözüm
Anahtar Kavram
Cisco Access Point Operational Modes and Traffic Forwarding Architectures