Examkin

Soru

Zorluk: OrtaCisco Wireless Architectures and AP Modes

Match each Cisco Lightweight Access Point (LAP) operational mode to its correct primary functional description.

  • FlexConnect ModeEnables local traffic switching and optional local authentication at branch sites during WAN link failure to the WLC.
  • Sniffer ModeCaptures raw 802.11 frames over the air and sends them to a remote packet analyzer such as Wireshark.
  • SE-Connect ModeDedicates the radio to collecting RF spectrum data for external analysis software like Cisco Spectrum Expert.
  • Rogue Detector ModeCorrelates MAC addresses seen wirelessly with MAC addresses learned on wired switch ARP/MAC tables to locate unauthorized devices.

Cevap

FlexConnect Mode matches local traffic switching during WAN outages; Sniffer Mode matches capturing raw 802.11 frames for packet analyzers; SE-Connect Mode matches sending raw RF data to spectrum analysis tools; Rogue Detector Mode matches correlating wireless and wired MAC addresses to find unauthorized devices.
Each mode serves a distinct operational purpose: FlexConnect allows branch local traffic switching without reliance on a persistent CAPWAP tunnel for user data. Sniffer mode captures raw 802.11 frames to send to network analysis tools like Wireshark. SE-Connect streams raw physical spectrum metrics to software tools like Cisco Spectrum Expert. Rogue Detector correlates MAC addresses from wired switch ports and rogue AP broadcasts to detect connected unauthorized access points.

Adım Adım Çözüm

1
Identify the primary purpose of FlexConnect mode in remote branch environments.
FlexConnect allows local data switching and client authentication even if the WAN tunnel to the controller drops.
This maintains survivability for branch wireless networks.
2
Determine the role of Sniffer mode versus SE-Connect mode.
Sniffer captures 802.11 layer 2 wireless frames for packet analyzer software, whereas SE-Connect captures layer 1 RF physical layer data for Cisco Spectrum Expert software.
Sniffer works at the frame/packet level while SE-Connect analyzes raw radio frequency interference.
3
Evaluate Rogue Detector mode operational behavior.
Rogue Detector APs do not serve client traffic on radios; instead, they monitor wired ARP/MAC tables to verify if rogue devices seen wirelessly are connected to the internal wired subnet.
Correlating wired MACs with wireless MACs isolates rogue APs physically connected to the enterprise network.

Anahtar Kavram

Cisco Access Point Operational Modes
Bu soruyu puanla

Konular

Cisco Wireless Architectures and AP Modes

Bu konudan daha fazla soru