A network engineer is configuring a Cisco IOS router to relay DHCP requests from hosts on VLAN 50 () to a centralized DHCP server with the IP address located on VLAN 10. The default gateway for VLAN 50 is configured on subinterface GigabitEthernet 0/0/0.50.
Which two statements accurately describe the required configuration and behavior of the DHCP relay agent in this scenario? (Select TWO.)
- The `ip helper-address 10.10.10.5` command must be configured under subinterface GigabitEthernet 0/0/0.50.Cevap
- The router converts incoming client DHCP DISCOVER broadcast packets into unicast UDP packets directed to 10.10.10.5.Cevap
- CThe `ip helper-address 10.10.10.5` command must be configured on the router interface connected directly to the DHCP server subnet.
- DThe router floods incoming client DHCP DISCOVER packets out all active trunk ports as Layer 2 broadcast frames.
Cevap
The helper address command must be applied on subinterface GigabitEthernet 0/0/0.50, and the router converts incoming client broadcast packets into unicast UDP packets directed to the DHCP server IP address.
DHCP relay agents must be configured on the client-facing gateway interface that receives client broadcast messages. When a client broadcasts a DHCP DISCOVER message, the router intercepts it on subinterface GigabitEthernet 0/0/0.50, populates the Gateway IP Address (giaddr) field with its own interface IP address, and unicasts the frame to the specified DHCP server IP address (10.10.10.5).
Adım Adım Çözüm
Anahtar Kavram
DHCP Relay Agent Interface Binding and Broadcast-to-Unicast Forwarding Mechanics