Examkin

Soru

Zorluk: KolayLayer 2 Security Features (Port Security, DHCP Snooping, DAI)

A network technician configures port security on an access switch interface using the command `switchport port-security mac-address sticky`. Which TWO statements accurately describe how sticky MAC address learning operates on this interface?

  1. Dynamically learned MAC addresses are automatically added to the active running configuration file.Cevap
  2. B
    Dynamically learned sticky MAC addresses are automatically written to NVRAM startup configuration without requiring manual saving.
  3. Learned sticky MAC addresses will be lost if the switch reboots before the running configuration is saved.Cevap
  4. D
    Sticky MAC learning allows untrusted frame traffic to bypass Layer 2 inspection on mismatched native VLAN trunks.

Cevap

Dynamically learned MAC addresses are automatically added to the active running configuration file, and learned sticky MAC addresses will be lost if the switch reboots before the running configuration is saved.
Enabling sticky MAC learning allows switch interfaces to convert dynamically learned MAC addresses into sticky MAC addresses and append them directly to the active running configuration. Because these entries reside in volatile memory, saving the running configuration to the startup configuration is required to maintain the learned addresses after a reboot.

Adım Adım Çözüm

1
Analyze the function of sticky MAC address learning in Cisco IOS Port Security.
When 'mac-address sticky' is configured, the switch dynamically learns connected MAC addresses and automatically converts them into sticky entries in RAM.
Sticky MAC learning dynamically writes learned addresses into the running configuration so administrators do not have to enter them manually.
2
Determine the memory persistence of the running configuration.
The running configuration exists in volatile RAM and is erased upon device reboot unless explicitly saved to NVRAM.
To persist sticky MAC addresses across switch reboots, an administrator must execute 'copy running-config startup-config'.

Anahtar Kavram

Port Security Sticky MAC Address Dynamics and Configuration Persistence
Tahmini Süre:1m 0s
Bu soruyu puanla

Konular

Layer 2 Security Features (Port Security, DHCP Snooping, DAI)

Bu konudan daha fazla soru