Examkin

Soru

Zorluk: ZorSpeed and Road Conditions

An articulated commercial vehicle is operating on a rural highway with a posted limit of 45 mph45\text{ mph} where recent snowfall has created a hard, packed-snow surface. As the vehicle approaches a downgrade leading into a sharp bend, which combination of speed and vehicle control actions must the driver take to maintain stability?

  1. A
    Reduce speed by at least half before reaching the curve while maintaining engine retarder engagement to assist braking.
  2. Reduce speed by at least half prior to entering the curve and ensure the engine retarder is switched off.Cevap
  3. C
    Maintain cruising speed until entering the curve, switch off the engine retarder, and apply firm service brake pressure throughout the turn.
  4. D
    Reduce speed by approximately one-third upon entering the curve and rely on service brakes to offset perception and reaction distance.

Cevap

Reduce speed by at least half prior to entering the curve and ensure the engine retarder is switched off.
On packed snow, commercial drivers must reduce vehicle speed by at least half (50%50\% or more) and complete all deceleration before entering a curve. Furthermore, auxiliary engine retarders must be disabled whenever road traction is compromised to prevent drive wheels from skidding.

Adım Adım Çözüm

1
Determine the required speed reduction ratio for packed snow.
Vehicle speed must be reduced from 45 mph45\text{ mph} down to roughly 20–22 mph20\text{--}22\text{ mph} (at least a 50%50\% reduction).
Standard commercial driving safety guidelines mandate slowing by at least one-half on packed snow to compensate for reduced friction.
2
Identify the proper timing for speed reduction before negotiating a curve and downgrade.
Speed reduction must be fully completed on the straight section prior to the curve.
Applying brakes inside a curve on low-traction surfaces overtaxes available tire grip and easily causes a drive-wheel or trailer skid.
3
Adjust auxiliary braking systems for slippery road conditions.
The auxiliary engine retarder must be turned off.
Retarders apply continuous braking force solely to the drive axles; on slick surfaces, this can cause the drive wheels to lock up and lead to an immediate jackknife.

Anahtar Kavram

Speed reduction ratios and auxiliary brake management on low-traction surfaces
Tahmini Süre:1m 30s
Bu soruyu puanla

Konular

Speed and Road Conditions

Bu konudan daha fazla soru