Examkin

Soru

Zorluk: OrtaTires, Wheels, and Rims Inspection

An equipment check on a commercial combination unit reveals several wheel and tire conditions across different axles. Which of the following observations constitutes a regulatory safety violation that prohibits operating the vehicle?

  1. A
    A tandem drive axle tire with a measured tread depth of 332 inch\frac{3}{32}\text{ inch} across all major tread grooves
  2. A front steering axle tire with a measured tread depth of 332 inch\frac{3}{32}\text{ inch} in a major tread grooveCevap
  3. C
    A trailer axle tire with a measured tread depth of 232 inch\frac{2}{32}\text{ inch} across all major tread grooves
  4. D
    A dual drive wheel assembly maintaining a clearance of 12 inch\frac{1}{2}\text{ inch} between tire sidewalls

Cevap

A front steering axle tire with a measured tread depth of 332 inch\frac{3}{32}\text{ inch} in a major tread groove is a safety violation.
Federal commercial motor vehicle regulations specify that front steer axle tires must have at least 432 inch\frac{4}{32}\text{ inch} of tread depth in every major groove. A steer tire with only 332 inch\frac{3}{32}\text{ inch} remaining violates safety standards and requires taking the vehicle out of service until the tire is replaced.

Adım Adım Çözüm

1
Recall the regulatory minimum tread depth requirements for commercial motor vehicle axles.
Front steer axle tires require a minimum of 432 inch\frac{4}{32}\text{ inch} in every major groove, while all other tires (drive, trailer, tag) require a minimum of 232 inch\frac{2}{32}\text{ inch}.
Steering tires carry critical lateral guidance loads and require greater tread depth to prevent hydroplaning and loss of directional control.
2
Compare the recorded physical measurements and physical conditions against federal safety limits.
The steer axle tire measuring 332 inch\frac{3}{32}\text{ inch} is below the mandatory 432 inch\frac{4}{32}\text{ inch} threshold, whereas all other drive and trailer tire measurements meet or exceed their respective 232 inch\frac{2}{32}\text{ inch} limit.
Operating a commercial motor vehicle with steer tire tread depth below the required standard is an immediate out-of-service violation.

Anahtar Kavram

Commercial Motor Vehicle Tire Tread Depth and Inspection Standards
Tahmini Süre:1m 15s
Bu soruyu puanla

Konular

Tires, Wheels, and Rims Inspection

Bu konudan daha fazla soru