Following an extended highway haul, a driver performs a physical check of the foundation b… — Commercial Driver's License (CDL) General Knowledge Exam

Following an extended highway haul, a driver performs a physical check of the foundation brake assemblies on a commercial combination vehicle. With the vehicle parked on level ground, wheels securely chocked, and parking brakes fully released, which of the following component conditions represents a critical defect that violates safety standards?

A
A brake lining on an S-cam drum brake assembly showing an even thickness of $\frac{3}{8}\text{ inch}$ ( $9.5\text{ mm}$ ) across the friction surface.
A manual slack adjuster pushrod that moves $1\frac{1}{2}\text{ inches}$ ( $38\text{ mm}$ ) at the clevis pin when pulled firmly by hand.Cevap
C
A brake drum containing fine, shallow surface heat checks that extend across less than one-third of the friction face width.
D
A brake chamber pushrod that exhibits $\frac{1}{2}\text{ inch}$ ( $12.7\text{ mm}$ ) of manual travel when pulled at the slack adjuster connection.

Cevap

A manual slack adjuster pushrod that moves

1\frac{1}{2}\text{ inches}

(

38\text{ mm}

) at the clevis pin when pulled firmly by hand.

The correct answer identifies an out-of-adjustment brake. When parking brakes are released and wheels are chocked, pulling a manual slack adjuster by hand should result in no more than approximately

1\text{ inch}

(

25.4\text{ mm}

) of pushrod free play at the clevis attachment point. Movement of

1\frac{1}{2}\text{ inches}

confirms excessive clearance between the brake linings and the drum, leading to brake fade and insufficient braking power.

Adım Adım Çözüm

Recall regulatory wear thresholds and tolerances for foundation brake hardware.

Brake shoe friction linings must be at least

\frac{1}{4}\text{ inch}

thick, drum cracks must not exceed half the friction surface width, and manual slack adjuster free play must not exceed

1\text{ inch}

when pulled by hand with brakes released.

Accurate inspection requires applying precise numerical criteria to determine vehicle roadworthiness.

Evaluate the measured values for each component presented in the scenario.

The lining thickness of

\frac{3}{8}\text{ inch}

is above the

\frac{1}{4}\text{ inch}

minimum; the drum heat checks do not exceed half the face width; the

\frac{1}{2}\text{ inch}

pushrod travel is within tolerance; however, the

1\frac{1}{2}\text{ inch}

pushrod movement exceeds the

1\text{ inch}

limit.

Identifying the single component that violates mandatory out-of-service standards isolates the safety violation.

Select the condition representing the out-of-tolerance defect.

Excessive manual slack adjuster travel of

1\frac{1}{2}\text{ inches}

is the defect.

Excessive pushrod stroke causes inadequate shoe-to-drum contact and severely degraded braking force.

Anahtar Kavram

Foundation brake component inspection standards and manual slack adjuster free play limits

Tahmini Süre:1m 30s

Soru

Cevap

Adım Adım Çözüm

Anahtar Kavram

Sık Yapılan Hatalar

Konular

Bu konudan daha fazla soru