Examkin

Soru

Zorluk: ZorStopping Distance Components

A commercial motor vehicle equipped with an air brake system and a delivery truck equipped with hydraulic brakes are both traveling at 60 mph60\text{ mph} on a level, dry highway. Both drivers experience identical perception times of 1.75 seconds1.75\text{ seconds} and reaction times of 0.75 seconds0.75\text{ seconds}. Before the mechanical friction of the brake linings actually begins slowing the vehicles, which statement correctly compares the total distance traveled by both vehicles during these pre-braking phases?

  1. A
    Both vehicles travel an identical pre-braking distance of 220 feet220\text{ feet} because brake lag only influences the vehicle during the mechanical braking friction phase.
  2. The air-brake-equipped vehicle travels approximately 44 feet44\text{ feet} farther before braking starts because compressed air requires about 0.5 seconds0.5\text{ seconds} of brake lag time to flow through the lines and actuate the brakes.Cevap
  3. C
    The hydraulic brake vehicle travels farther during pre-braking because hydraulic fluid displacement introduces a longer delay than pneumatic valve actuation.
  4. D
    The air-brake-equipped vehicle travels 154 feet154\text{ feet} farther before braking begins because pneumatic systems double the driver's required perception time.

Cevap

The air-brake-equipped vehicle travels approximately 44 feet44\text{ feet} farther before braking starts because compressed air requires about 0.5 seconds0.5\text{ seconds} of brake lag time to flow through the lines and actuate the brakes.
Total stopping distance for hydraulic brakes consists of three components: perception distance, reaction distance, and braking distance. For air brakes, a fourth component—brake lag distance—is added because air takes approximately 0.5 seconds0.5\text{ seconds} to travel through the air brake lines after the driver presses the foot valve. At 60 mph60\text{ mph} (88 ft/s88\text{ ft/s}), this 0.5 second0.5\text{ second} lag accounts for an additional 44 feet44\text{ feet} of travel before the mechanical brakes start slowing the vehicle.

Adım Adım Çözüm

1
Calculate vehicle velocity and driver response distances at 60 mph60\text{ mph}.
At 60 mph60\text{ mph}, speed is 88 ft/s88\text{ ft/s}. Perception distance (1.75 s1.75\text{ s}) is 154 ft154\text{ ft}, and reaction distance (0.75 s0.75\text{ s}) is 66 ft66\text{ ft}, giving a driver response total of 220 ft220\text{ ft}.
Both vehicles share identical driver latency phases before any mechanical input reaches the brake pedal.
2
Determine pre-braking distance for hydraulic brakes.
Hydraulic pre-braking distance is 220 ft220\text{ ft}.
Hydraulic brake fluid is virtually incompressible, resulting in instantaneous shoe/pad actuation upon pedal depression without air lag.
3
Determine pre-braking distance for air brakes including brake lag.
Air brake pre-braking distance is 220 ft+(88 ft/s×0.5 s)=264 ft220\text{ ft} + (88\text{ ft/s} \times 0.5\text{ s}) = 264\text{ ft}.
Air takes approximately half a second (0.5 s0.5\text{ s}) to flow through valves and air lines to push the pushrod and rotate the S-cam before friction begins.
4
Compare the pre-braking distance totals between the two systems.
The air brake vehicle travels an additional 44 feet44\text{ feet} (264 ft−220 ft264\text{ ft} - 220\text{ ft}) prior to deceleration.
Brake lag distance is an extra physical latency phase unique to air brakes.

Anahtar Kavram

Distinction between 3-component hydraulic stopping distance and 4-component air brake stopping distance due to brake lag.
Tahmini Süre:1m 30s
Bu soruyu puanla

Konular

Stopping Distance Components

Bu konudan daha fazla soru